On Wed, 11 Oct 2000, Perry Hoekstra wrote: > Which one? I have gone through the PCMCIA How-To but it really doesn't > apply because I am try to get the onboard Ethernet to work, not a PCMCIA > card. In addition, I have gone through the various pertinant chapters > in "Running Linux" in order to "get a clue" but have had no great > revelations. I have poked around my Red Hat 6.2 installation on my home > workstation but it basically showed my what Tom Veldhouse described. > That in conf.modules, I have an alias to eth0 for the tulip module. Is this a RedHat box? If so, create the alias in conf.modules/modules.conf, and then create a file called /etc/sysconfig/network-scripts/ifcfg-eth0 with the following: DEVICE=eth0 IPADDR=192.168.100.1 NETMASK=255.255.255.0 NETWORK=192.168.100.0 BROADCAST=192.168.100.255 ONBOOT=yes ..use your own settings, of course. Or, you can run linuxconf, and do it all from there. -- Nate Carlson <natecars at real-time.com> | Phone : (952)943-8700 http://www.real-time.com | Fax : (952)943-8500 --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org