Yes, I'm using Cisco 675 for doing NAT. IP Addr of my linux machine is 10.0.0.2 (Assigned by DHCD server running on Cisco 675) cbos>show nat NAT is currently enabled Inside Global Address set to 63.228.43.76 Inside Local Inside Global Timer Flags Protocol 10.0.0.2:22 63.224.6.31:22 0 0x41 tcp This was setup for ssh connection (for other machine, not with me anymore) Here's some more output: ---------------------------------------------- [mandar at omega mandar]$ cat /etc/nsswitch.conf | grep hosts #hosts: db files nisplus nis dns hosts: files dns [mandar at omega mandar]$ cat /etc/hosts 127.0.0.1 omega localhost 204.147.80.1 ns3.mn.uswest.net 204.147.80.5 ns1.mn.uswest.net [mandar at omega mandar]$ nslookup - ns3.mn.uswest.net *** Can't find server name for address 204.147.80.1: No response from server *** Default servers are not available [mandar at omega mandar]$ ---------------------------------------------- -Mandar __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: tclug-list-unsubscribe at mn-linux.org For additional commands, e-mail: tclug-list-help at mn-linux.org