My old burner died that way.  It wouldn't fixate disks.  It started with a
couple and then, soon, it wouldn't fixate ANY disk.  I hope this is not the
case for you, but it happened to me that way.  Perhaps you might try
cleaning the drive with compressed air.

Tom Veldhouse
veldy at veldy.net

----- Original Message -----
From: "Austad, Jay" <austad at marketwatch.com>
To: <tclug-list at mn-linux.org>
Sent: Tuesday, June 05, 2001 10:42 AM
Subject: RE: [TCLUG] PNY CD-Rs?


> The Memorex and Imation 700MB discs work just fine in my burner.  The PNY
> ones are the only ones I have trouble with, and they say "700MB" on each
and
> every one of them.
>
> The burn actually finishes, but I get an error when it fixates the disc.
> Some kind of end of media error.  In both my acer 12x under linux, and my
> sony 4x under winXP.
>
>
>
> > -----Original Message-----
> > From: Thomas T. Veldhouse [mailto:veldy at veldy.net]
> > Sent: Tuesday, June 05, 2001 8:14 AM
> > To: tclug-list at mn-linux.org
> > Subject: Re: [TCLUG] PNY CD-Rs?
> >
> >
> > If you can't burn past 600MB, it sounds like a burner
> > problem, not a media
> > problem (I have used these same media to full capacity
> > without incident on
> > my HP9100i).  It sounds like your laser is having problems at
> > the out edge
> > and or the server does not like to slow down enough to record
> > at the outer
> > edge.
> >
> > Tom Veldhouse
> > veldy at veldy.net
> >
> > ----- Original Message -----
> > From: "Callum Lerwick" <seg at haxxed.com>
> > To: <tclug-list at mn-linux.org>
> > Sent: Tuesday, June 05, 2001 12:27 AM
> > Subject: Re: [TCLUG] PNY CD-Rs?
> >
> >
> > > > > I bought a spindle of 100 for $20 at best buy.  They
> > suck.  They are
> > > > > 700MB discs, but anything over 600MB fails.  I'm extremely
> > disappointed with
> > > > > them, and I'm going to complain to PNY.
> > >
> > > Are you sure they're really 700mb disks? Do other brands of
> > 700mb disks
> > > work? I wouldn't put it beyond an ultra cheap brand like
> > them to lie. ;P
> > >
> > > That or your burner just doesn't like high capacity media.
> > > _______________________________________________
> > > tclug-list mailing list
> > > tclug-list at mn-linux.org
> > > https://mailman.mn-linux.org/mailman/listinfo/tclug-list
> > >
> >
> > _______________________________________________
> > tclug-list mailing list
> > tclug-list at mn-linux.org
> > https://mailman.mn-linux.org/mailman/listinfo/tclug-list
> >
> _______________________________________________
> tclug-list mailing list
> tclug-list at mn-linux.org
> https://mailman.mn-linux.org/mailman/listinfo/tclug-list
>