You could do this using a PIC processor, one of the small 4 pin devices and a transistor or two. should be trivial (imho). I'm not a PIC programmer however ;-) On Mon, 2002-03-11 at 10:12, Nate Carlson wrote: > On 11 Mar 2002, John Scherer wrote: > > What would be cool is to use a tri-color led and a simple circuit to > > convert voltages. This way you would get red for one controller, > > Green for the Second, and Yellow for the third controller. > > > > Tricolor LEDs come in two- and three-pin packages. Although the > > three-pin, or common-cathode, package easily lends itself to 2-bit > > control, wiring three crowded pins can be mechanically difficult. > > Also, fewer manufacturers produce the three-pin types. The two-pin > > package is easier to connect to a wiring harness and is readily > > available. However, this package requires more control overhead, > > because, to light the LED yellow, the device must continuously > > alternate between red and green. > > > > For this application however I thing the three lead version might me > > simpler. > > Now this sounds cool. :) > > Anyone feel like making a circuit that would drive one of these suckers? > > -- > Nate Carlson <natecars at real-time.com> | Phone : (952)943-8700 > http://www.real-time.com | Fax : (952)943-8500 > > > _______________________________________________ > Twin Cities Linux Users Group Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list