I tried appending that and it didn't work.

I'm getting this error.

VFS: Cannot open root device "sda3" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)

I set up grub like this

# grub
grub> root (hd0,0)
grub> setup (hd0)
grub> quit

I did this because (sd0,0) wasn't found and (hd0,0) found my partitions.

My grub.conf file looks like this

default 0
timeout 10
splash.....

title=Gentoo Linux (development-sources-2.6.6)
root (hd0,0)
kernel /development-sources-2.6.6 root=/dev/sda3 doscsi

It still didtn't work with the doscsi at the end.

Any other suggestions?

-Josh




> -----Original Message-----
> From: tclug-list-bounces at mn-linux.org
> [mailto:tclug-list-bounces at mn-linux.org]On Behalf Of Jason Sievert
> Sent: Monday, June 28, 2004 11:19 AM
> To: TCLUG Mailing List
> Subject: Re: [TCLUG] aic7xxx kernel module
> 
> 
> It is in the grub.conf file append it to the end of your kernel line
> Here is my grub.conf file
> 
> title  GNU/Linux 2.6.5-r1
> root   (hd0,0)
> kernel /kernel-2.6.5-gentoo-r1 doscsi
> initrd /initrd-2.6.5-gentoo-r1
> 
> 
> Josh Close wrote:
> > I'm not familiar with that. Could you explain it a little?
> > 
> > Is it a kernel options? Or is it in the grub.conf file?
> > 
> > -Josh
> > 
> > 
> >>-----Original Message-----
> >>From: tclug-list-bounces at mn-linux.org
> >>[mailto:tclug-list-bounces at mn-linux.org]On Behalf Of Jason Sievert
> >>Sent: Monday, June 28, 2004 9:48 AM
> >>To: TCLUG Mailing List
> >>Subject: Re: [TCLUG] aic7xxx kernel module
> >>
> >>
> >>One thing on gentoo distros is that for scsi to work a lot of 
> >>the time 
> >>you need to pass the kernel option of "doscsi" to get it to 
> even look 
> >>for scsi hardware.
> >>
> >>Jason
> >>
> >>Josh Close wrote:
> >>
> >>>Whatis the aic7xxx kernel module called under "make menuconfig"?
> >>>
> >>>I've done a gentoo install and when the livecd booted, I 
> >>
> >>had to "modprobe
> >>
> >>>aic7xxx". When I finished and restarted the computer, the 
> >>
> >>kernel couldn't
> >>
> >>>find the hard drive due to the scsi raid controller. I 
> >>
> >>think I just need to
> >>
> >>>load this module.
> >>>
> >>>-Josh
> >>>
> >>>
> >>>
> >>>_______________________________________________
> >>>TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
> >>>Help beta test TCLUG's potential new home: 
> http://plone.mn-linux.org
> >>>Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery
> >>>tclug-list at mn-linux.org
> >>>https://mailman.real-time.com/mailman/listinfo/tclug-list
> >>
> >>_______________________________________________
> >>TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
> >>Help beta test TCLUG's potential new home: http://plone.mn-linux.org
> >>Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery
> >>tclug-list at mn-linux.org
> >>https://mailman.real-time.com/mailman/listinfo/tclug-list
> >>
> > 
> > 
> > 
> > 
> > _______________________________________________
> > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
> > Help beta test TCLUG's potential new home: http://plone.mn-linux.org
> > Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery
> > tclug-list at mn-linux.org
> > https://mailman.real-time.com/mailman/listinfo/tclug-list
> 
> _______________________________________________
> TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
> Help beta test TCLUG's potential new home: http://plone.mn-linux.org
> Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery
> tclug-list at mn-linux.org
> https://mailman.real-time.com/mailman/listinfo/tclug-list
> 
> 



_______________________________________________
TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
Help beta test TCLUG's potential new home: http://plone.mn-linux.org
Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery
tclug-list at mn-linux.org
https://mailman.real-time.com/mailman/listinfo/tclug-list