I would try the PC attachment using first no address for the PC and then an address within the subnet. Most of the routers and all will allow entry this way. Also, there should be a command to do the reset after it is attached to the PC. What does their book say? One other way may be to come in from outside the subnet and network, from another site. Keep looking up, Tim ----- Original Message ----- From: "Tim Wilson" <wilson at visi.com> To: "TCLUG" <tclug-list at mn-linux.org> Sent: Friday, May 07, 2004 6:30 AM Subject: Re: [TCLUG] [OT] wrong netmask wreaks havoc > On 5/7/04 1:49 AM, "Scot Jenkins" <scot at thinkunix.net> wrote: > > > what does voyage tech support say? surely someone else has fat fingered > > a setting in the web config. there must be a way to reset it. > > You would think, wouldn't you. I talked to two techs who suggested the steps > that I'd already tried. There is no way to reset except through the Web > interface. That seems like a design flaw to me. > > -Tim > > -- > Tim Wilson > Twin Cities, Minnesota, USA > Educational technology guy, Linux and OS X fan, Grad. student, Daddy > mailto: wilson at visi.com aim: tis270 public key: 0x8C0F8813 > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list