I'm only familiar with the 33XX, 34XX, and 5224 and 5324. (33XX and 34XX switches are 10/100 switches, replace XX with 24 or 48 for number of ports., 5224 and 5324 are gig switches). They all support the features I mentioned as well as SNMP, but some of the older firmware versions do not. This isn't a big deal as you can get the firmware updates from Dell for free. Just remember to flash them before you configure. Dell recently went to the next generation on their switches, so the model numbers are 35XX for the 10/100 and 54XX for the gig. We have some of these on order but they haven't arrived yet so I can't say much about them. If you find yourself looking at used gear you might find it helpful to know that the 5224 is a bit deeper than the 5324. For the most part the CLI configuration is the same, but there are a few differences depending on the series, gig vs 10/100, and firmware revisions. Again something that mostly goes away when everything is running the latest firmware. -- Andrew S. Zbikowski | http://andy.zibnet.us IT Outhouse Blog Thing | http://www.itouthouse.com