Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) RADIUS:No reaction from remote partner
I use a Ascend MAX 200x with 5.0ap32 (p36 also didn't work...).
When authenticating dial-in users over locally defined profiles all is
good. When using RADIUS (from Ascend's FTP site or other RADIUS deamons),
the authentication first seems to work (wehn using WIn 95 dialup-network
it is displayed that username/password is correct) but then after some 10
seconds of doing nothing dial-up-network hangs up saying that the remote
partner didn't respond to the PPP packets.
Any hint what I did wrong?
Here the RADIUS user file:
test1 Password = "test"
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 101.0.0.184
Framed-Netmask = 255.255.255.255
Framed-Compression = Van-Jacobsen-TCP-IP
Framed-Routing = None
Ascend-Idle-Limit = 300
Ascend-Client-Assign-DNS = DNS-Assign-Yes
# Dec 1 20:11:40.805 radiusd[11008] Free aged authreq: max.1025, id=46
Dec 1 20:11:40.805 radiusd[11008] New request: max.1025, id=47
Dec 1 20:11:40.806 radiusd[11008] handle_radius_request: max.1025, id=47,
code=1, length=87
Dec 1 20:11:40.807 radiusd[11052] fork in rad_spawn_child (child)
request: User-Name = "test1"
request: Password = "G\367\274\342@\206\315{"
request: NAS-Identifier = 101.0.0.150
request: NAS-Port = 10202
request: NAS-Port-Type = ISDN-Sync
request: State = ""
request: Caller-Id = "07131799xxxx"
request: Client-Port-DNIS = "2"
request: Acct-Session-Id = "249522077"
Dec 1 20:11:40.820 radiusd[11052] rad_authenticate
Dec 1 20:11:40.824 radiusd[11052] DEBUGRJB rad_authenticate() 971006a: Got
RADIUS-encoded password
Dec 1 20:11:40.825 radiusd[11052] User record PASSWORD type is Radius
Dec 1 20:11:40.825 radiusd[11052] authPapPwd
Dec 1 20:11:40.825 radiusd[11052] authPapPwd: authPwd encrypted: 47(G)
ff() ff ff 40(@) ff ff 7b({)
Dec 1 20:11:40.826 radiusd[11052] authPapPwd: authPwd decrypted: 63(x)
65(x) 6e(x) 74(x) 61(x) 75(x) 72(x) 00
Dec 1 20:11:40.826 radiusd[11052] send_accept: max.1025, id=47
reply: User-Service = Framed-User
reply: Framed-Protocol = PPP
reply: Framed-Address = 101.0.0.184
reply: Framed-Netmask = 255.255.255.255
reply: Framed-Compression = Van-Jacobsen-TCP-IP
reply: Framed-Routing = None
reply: Ascend-Idle-Limit = 300
reply: Ascend-Client-Assign-DNS = DNS-Assign-Yes
Dec 1 20:11:40.829 radiusd[11008] fork in rad_spawn_child (parent)
Dec 1 20:11:55.819 radiusd[11052] Child process exiting normally
Dec 1 20:12:14.280 radiusd[11010] Free aged authreq: max.1026, id=219
Dec 1 20:12:14.281 radiusd[11010] New request: max.1026, id=220
Dec 1 20:12:14.282 radiusd[11010] handle_radius_request: max.1026, id=220,
code=4, length=126
request: NAS-Identifier = 101.0.0.150
request: NAS-Port = 10202
request: NAS-Port-Type = ISDN-Sync
request: Acct-Status-Type = Stop
request: Acct-Delay-Time = 0
request: Acct-Session-Id = "249522077"
request: Ascend-Disconnect-Cause = 185
request: Ascend-Connect-Progress = 65
request: Ascend-Data-Rate = 64000
request: Ascend-PreSession-Time = 34
request: Ascend-Pre-Input-Octets = 377
request: Ascend-Pre-Output-Octets = 189
request: Ascend-Pre-Input-Packets = 16
request: Ascend-Pre-Output-Packets = 16
request: Caller-Id = "07131799xxx"
request: Client-Port-DNIS = "2"
Dec 1 20:12:14.289 radiusd[11010] send_acct_reply: max.1026, id=220
Whats going on here?
Elmar
----------------------------------------------------------------------
Elmar Haag CENTAUR COMMUNICATION Urbanstrasse 68
haag@centaur.de Xlink PoP Heilbronn 74074 Heilbronn
http://www.centaur.de Tel +49 7131 799 258 Fax +49 7131 799 260
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>