Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) My Error: K56 boards rev. F
I realize that I'm a bit late getting around to reading this, but does this
also apply to the Max TNT cards?
--Tony
----------
> From: Kevin Smith <kevin@ascend.com>
> To: Ascend User-Group <ascend-users@bungi.com>
> Subject: (ASCEND) My Error: K56 boards rev. F
> Date: Wednesday, October 29, 1997 12:00 PM
>
> At 10:02 PM 10/28/97 -0500, Chris A. Epler wrote:
> >On Tue, 28 Oct 1997, Kevin Smith wrote:
> >
> >> Not totally. The magic "number" is the serial number, rather than the
> >> board revision.
> >
> >What are the recalled ranges or the range of S/N's that are good?
>
> It turns out that I was working with poor information,
> or poor recall of good information ;(
>
> The secret actually *IS* Revision F boards. The serial number check
> was supposed to make it easy to identify good versus *possible* bad
> boards. Revision F is good! Serial numbers greater than 723xxxx are
> good (they should all be Rev. F or better), older serial numbers
> need to be checked...if they are pre-Revision F, then they should
> be RMA'd. If they are Rev. F then they are the latest version - even
> if the serial number is lower than 723xxxx.
>
> Sorry for the confusion. May I be forgiven ;) ?
>
>
> Kevin
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: