Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Maxes and Bitsurfer Pro
Well, I let Bennie dial into one of my MAX's with a test account I setup
for him, and no luck. I have 100 or so users dialing into these boxes with
bitsurfers and holding 2 channels no problem. I am guessing that it is
either a problem with the BRI, the Mac, or the Bitsurfer itself....
let me know if I can be of anymore help....
thanks
luke
At 01:04 PM 12/14/97 -0800, Bennie Warren wrote:
>Yes it is served out of a radius file. I am running K software. I am also
>running on a Mac and dialing the number twice. I think I have just about
>memorized the ascend manual on the 4xxx products. I am kinda curious
>about Trnk Grp. I have all PRI's from the same company. Should I have
>Trnk Grp set to off and does this only affect outbound calling or in and
>oubound? I also think PacBell may have a problem as I can only reach the
>first Max and none of the others. So if it is full, than I get no carrier
>returned by the TA. I believe this part could be a centrex problem. It is
>getting more interesting by the moment.
>
>Bennie
>
>>Is then connection connecting out of a users file via RADIUS? Or is this
>>connection a local profile on the max?
>>
>>Are you running at least rev K of bitsurfer software?
>>
>>Are you dialing the number twice? ie 123-1234&123-1234
>>
>>Try this init string for your bitsurfer...
>>
>>AT&F&C1&D2%A2=95%A4=1@B0=2@M2=P
>>
>>This can be found under: modem properties in the control panel, in the
>>extra settings field...
>>
>>let me know...
>>
>>
>>At 05:08 PM 12/13/97 -0800, you wrote:
>>>I have set the Target Util to 1 which is the lowest setting and still no
>>>luck. Does anyone have a number I could use to see if the Bitsurfer will
>>>come up on 2 channels? I think the Maxes are set right but not even
>>>positive there. I am using PRI's. I have a centrex dial plan so I can
>>>provide cheap ISDN locally with two digital channels. I can see the light
>>>flashing rapidly on the Bitsurfer which says it is trying to bring up the
>>>second line but can't. I check the max and show 1 64k channel up.
>>>
>>>Thanks
>>>Bennie
>>>
>>>>Yeh, i set them up all the time with no problems... You have to remember
>>>>that if your ISP is using a MAX, they probably have the Target Util field
>>>>set to default of 70. Which means that your second channel wont "bond"
>>>>until 70 percent of your first channel is in use...
>>>>
>>>>Let me know where you are in this process so i can know where to start...
>>>>
>>>>
>>>>
>>>>
>>>>At 07:25 PM 12/11/97 -0800, you wrote:
>>>>>Is anyone using a Bitsurfer Pro with dual channel ISDN and getting it to
>>>>>bring up the second channel? If so I could use a couple of pointers.
>>>>>
>>>>>Thanks
>>>>>Bennie
>>>>>
>>>>>**************************************
>>>>>Bennie Warren /\
>>>>>LemooreNet / /
>>>>>320 West D Street / /
>>>>>Lemoore, CA 93245 / / /\ /\
>>>>>Phone: 209.924.5909 / /_ _ / \ / /
>>>>>Fax 209.924.9578 \ _ _ / /\ \/ /
>>>>>bennie@lemoorenet.com / / \ /
>>>>>http://www.lemoorenet.com /_/ \/
>>>>>**************************************
>>>>>
>>>>>
>>>>>++ Ascend Users Mailing List ++
>>>>>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>>>>>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>>>>>
>>>>>
>>>>
>>>>
>>>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>>>* Luke Parrish * Email lparrish@iamerica.net *
>>>>* LDS-iAmerica, ISP * Email luke@ciscokid.iamerica.net *
>>>>* Network Engineer * Phone 1-800-789-6062 x3010 *
>>>>* AS 4958 * http://cust.iamerica.net/lparrish *
>>>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>>>* I love the Internet, and you should too. *
>>>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>>>
>>>
>>>
>>>**************************************
>>>Bennie Warren /\
>>>LemooreNet / /
>>>320 West D Street / /
>>>Lemoore, CA 93245 / / /\ /\
>>>Phone: 209.924.5909 / /_ _ / \ / /
>>>Fax 209.924.9578 \ _ _ / /\ \/ /
>>>bennie@lemoorenet.com / / \ /
>>>http://www.lemoorenet.com /_/ \/
>>>**************************************
>>>
>>>
>>>++ Ascend Users Mailing List ++
>>>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>>>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>>>
>>>
>>
>>
>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>* Luke Parrish * Email lparrish@iamerica.net *
>>* LDS-iAmerica, ISP * Email luke@ciscokid.iamerica.net *
>>* Network Engineer * Phone 1-800-789-6062 x3010 *
>>* AS 4958 * http://cust.iamerica.net/lparrish *
>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>* I love the Internet, and you should too. *
>>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>>
>
>
>**************************************
>Bennie Warren /\
>LemooreNet / /
>320 West D Street / /
>Lemoore, CA 93245 / / /\ /\
>Phone: 209.924.5909 / /_ _ / \ / /
>Fax 209.924.9578 \ _ _ / /\ \/ /
>bennie@lemoorenet.com / / \ /
>http://www.lemoorenet.com /_/ \/
>**************************************
>
>
>
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Luke Parrish * Email lparrish@iamerica.net *
* LDS-iAmerica, ISP * Email luke@ciscokid.iamerica.net *
* Network Engineer * Phone 1-800-789-6062 x3010 *
* AS 4958 * http://cust.iamerica.net/lparrish *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* I love the Internet, and you should too. *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>