Either. It is a directly reachable system (directly via either the ethernet interface or a point to point interface [i.e. beeing a LAN Adrs in one of the enabled profiles]) to which you want IP packets to be forwarded in order for them to reach the net given as Destination. Which you use depends on your topology. And whether you need static routes at all. > To be more precise: > My home situation is just one PC with one pipe 50. > The office situation is one pipe 50 with an NTserver and a bunch of PC's > all on the same network. Your PC is uplinked to the home P50. The home P50 is uplinked to the office P50. The office is not linked any further (you didn't mention a router to the Internet). > What do I fill in the Gateway parameter of my default static route at > home: my PC's IP address or the address fo the pipe in the office? You missed question one: What to fill in the PC itself ? Typical uplink: PC: 0.0.0.0/0 (default) via IP-of-P50@home P50@home: 0.0.0.0/0 (default) via IP-of-P50@office The P50 in the office has no default route. > What should I fill in the Gateway parameter in the office pipe: > either the IP address of the NT server or the address of my home pipe. Neither. > Or may be nothing at all?? Exactly - disable the default route. You would enable it if you have a default gateway to the internet in your office net and point it there. BTW, you could replace the default route on your P50@home with an explicite route to your office network to prevent it from dialing on destinations which are not in your office net anyway. Nicely enough you don't have to do anything for this to occure because Ascend gear adds such route automatically based on LAN Adrs IP and Netmask. So you could live with disabled default route on anything but your PC. -- Kanther-Line: PGP SSH IDEA MD5 GOST RIPE-MD160 3DES RSA FEAL32 RC4 +-o-+--------------------------------------------------------+-o-+ | o | \\\- Brain Inside -/// | o | | o | ^^^^^^^^^^^^^^ | o | | o | Andre' Beck (ABPSoft) beck@ibh-dd.de XLink PoP Dresden | o | +-o-+--------------------------------------------------------+-o-+ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11233.html">Re: (ASCEND) Users online time...</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11227.html">Re: (ASCEND) speeding up callback</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11023.html">Re: (ASCEND) Gateway</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg10867.html">Re: (ASCEND) Link-Comp-MS-Stac stops working (fwd)</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11228"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd248.html#11228"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>