I use a Ascend MAX 200x with 5.0ap32 (p36 also didn't work...). When authenticating dial-in users over locally defined profiles all is good. When using RADIUS (from Ascend's FTP site or other RADIUS deamons), the authentication first seems to work (wehn using WIn 95 dialup-network it is displayed that username/password is correct) but then after some 10 seconds of doing nothing dial-up-network hangs up saying that the remote partner didn't respond to the PPP packets. Any hint what I did wrong? Here the RADIUS user file: test1 Password = "test" User-Service = Framed-User Framed-Protocol = PPP Framed-Address = 101.0.0.184 Framed-Netmask = 255.255.255.255 Framed-Compression = Van-Jacobsen-TCP-IP Framed-Routing = None Ascend-Idle-Limit = 300 Ascend-Client-Assign-DNS = DNS-Assign-Yes # Dec 1 20:11:40.805 radiusd[11008] Free aged authreq: max.1025, id=46 Dec 1 20:11:40.805 radiusd[11008] New request: max.1025, id=47 Dec 1 20:11:40.806 radiusd[11008] handle_radius_request: max.1025, id=47, code=1, length=87 Dec 1 20:11:40.807 radiusd[11052] fork in rad_spawn_child (child) request: User-Name = "test1" request: Password = "G\367\274\342@\206\315{" request: NAS-Identifier = 101.0.0.150 request: NAS-Port = 10202 request: NAS-Port-Type = ISDN-Sync request: State = "" request: Caller-Id = "07131799xxxx" request: Client-Port-DNIS = "2" request: Acct-Session-Id = "249522077" Dec 1 20:11:40.820 radiusd[11052] rad_authenticate Dec 1 20:11:40.824 radiusd[11052] DEBUGRJB rad_authenticate() 971006a: Got RADIUS-encoded password Dec 1 20:11:40.825 radiusd[11052] User record PASSWORD type is Radius Dec 1 20:11:40.825 radiusd[11052] authPapPwd Dec 1 20:11:40.825 radiusd[11052] authPapPwd: authPwd encrypted: 47(G) ff() ff ff 40(@) ff ff 7b({) Dec 1 20:11:40.826 radiusd[11052] authPapPwd: authPwd decrypted: 63(x) 65(x) 6e(x) 74(x) 61(x) 75(x) 72(x) 00 Dec 1 20:11:40.826 radiusd[11052] send_accept: max.1025, id=47 reply: User-Service = Framed-User reply: Framed-Protocol = PPP reply: Framed-Address = 101.0.0.184 reply: Framed-Netmask = 255.255.255.255 reply: Framed-Compression = Van-Jacobsen-TCP-IP reply: Framed-Routing = None reply: Ascend-Idle-Limit = 300 reply: Ascend-Client-Assign-DNS = DNS-Assign-Yes Dec 1 20:11:40.829 radiusd[11008] fork in rad_spawn_child (parent) Dec 1 20:11:55.819 radiusd[11052] Child process exiting normally Dec 1 20:12:14.280 radiusd[11010] Free aged authreq: max.1026, id=219 Dec 1 20:12:14.281 radiusd[11010] New request: max.1026, id=220 Dec 1 20:12:14.282 radiusd[11010] handle_radius_request: max.1026, id=220, code=4, length=126 request: NAS-Identifier = 101.0.0.150 request: NAS-Port = 10202 request: NAS-Port-Type = ISDN-Sync request: Acct-Status-Type = Stop request: Acct-Delay-Time = 0 request: Acct-Session-Id = "249522077" request: Ascend-Disconnect-Cause = 185 request: Ascend-Connect-Progress = 65 request: Ascend-Data-Rate = 64000 request: Ascend-PreSession-Time = 34 request: Ascend-Pre-Input-Octets = 377 request: Ascend-Pre-Output-Octets = 189 request: Ascend-Pre-Input-Packets = 16 request: Ascend-Pre-Output-Packets = 16 request: Caller-Id = "07131799xxx" request: Client-Port-DNIS = "2" Dec 1 20:12:14.289 radiusd[11010] send_acct_reply: max.1026, id=220 Whats going on here? Elmar ---------------------------------------------------------------------- Elmar Haag CENTAUR COMMUNICATION Urbanstrasse 68 haag@centaur.de Xlink PoP Heilbronn 74074 Heilbronn <A HREF="http://www.centaur.de">http://www.centaur.de</A> Tel +49 7131 799 258 Fax +49 7131 799 260 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11244.html">Re: Fw: (ASCEND) Pipeline family and Always On/DI?</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11271.html">Re: (ASCEND) Multiple radiusd</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11298.html">Re: (ASCEND) Multiple radiusd</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11256.html">(ASCEND) NetWarp 2.2.9</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail3.html#11242"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd261.html#11242"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>