Where is this free software from rockwell to download? Camilo ---------- From: Kevin Smith <kevin@ascend.com> To: ascend-users@bungi.com Subject: Re: (ASCEND) modemdiag output on 5.0Ap36 Date: Monday, December 01, 1997 9:11 PM At 02:51 PM 11/28/97 -0500, Chris A. Epler wrote: >I noticed something new (?) in the modemdiag output of 5.0Ap36, towards the >end there is a sequence of > >BEGIN<misc hex string>END <snip> >BEGINaa14ab14ac14ba0bb0bc0ca77cb67cc118da255ea255eb255fa110ga10gb255ha1hb0h c3hd0he0hf0hg0hh0hi0ia255ib255ic0ja0jb0jc0jd0ka1kb1kc0kd0ke0kf0kg0kh255ki255 kj255kk0kl82la0lb0ma0mb42mc55na0nb0oa255ob255oc255pa12END The hex string bt. the BEGIN and END is the output of AT&V2 command. It gives you additional information such as Signal to Noise ratio, retrain requested by server, retrain requested by client, whether client is a USR modem, etc. Rockwell has a program to parse these results. It's free. Here is an example of the parsed output: Current Transmit Speed : 31200 bps Minimum Transmit Speed : 31200 bps Maximum Transmit Speed : 31200 bps Current Receive Speed : 28800 bps Minimum Receive Speed : 28800 bps Maximum Receive Speed : 28800 bps Error Correction Protocol : LAP-M Compression type : V.42bis Modulation : V.34 Symbol Rate : 3429 baud Transmit Carrier Frequency : 1959 Hz Receive Carrier Frequency : 1959 Hz Last AGC Gain value : -12.000000 dB Minimum AGC Gain value : -12.000000 dB Maximum AGC Gain value : -12.000000 dB Transmit level : 10 Transmit level reduction : 3 Last EQM read : 13 Minimum EQM value : FF Maximum EQM value : 00 # of EQM hits : 0 EQM Sum value : 0034A8 Reserved : 0 Reserved : 0 SNR Ratio : 37.200000 dB Minimum SNR Ratio : 37.200000 dB Maximum SNR Ratio : 37.200000 dB # of Local Retrains : 0 # of Remote Retrains : 0 # of Local Rate Renegs : 0 # of Remote Rate Renegs : 0 Transmit Non-linear Encoding: YES Receive Non-linear Encoding : YES Transmit precoding : NO Receive precoding : YES Transmit Shaping : No Receive Shaping : Yes Trellis mapping : 64 state Pre-emphasis : Filter #0 Upper band edge : 3825.000000 Lower band edge : 150.000000 Round trip delay : 3.207495 ms Info Sequence 0 : 21FF Highest Transmit State : 67 Highest Receive State : 67 Time connected : 0 Hours 0 Minutes 19 Seconds Auto gain amplitude : 0 dB Auto gain attenuation : 0 dB Maximum retransmissions : 1 Total retransmissions : 0 Disconnect Reason : Link Disconnect New Field in Q : 255 Kevin ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11287.html">(ASCEND) Death of the Incremental releases?</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11286.html">Re: (ASCEND) anyone know if bri bug is fixed yet?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11311.html">Re: (ASCEND) modemdiag output on 5.0Ap36</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11297.html">RE: (ASCEND) modemdiag output on 5.0Ap36</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail2.html#11290"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd259.html#11290"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>