Below is what I'm talking about this only lives in Incremental's and engineering releases right now. So To fully take advantage of upgrading/downgrading OS releases via SNMP you must be running an incremental. The reboot is: sysReset OBJECT-TYPE SYNTAX INTEGER { no-op( 1 ), reset( 2 ) } ACCESS read-write STATUS mandatory DESCRIPTION "The reset takes effect after 1 minute." ::= { systemStatusGroup 8 } Jason Nealis Director Internet Operations Network Access Erols Internet On Tue, 2 Dec 1997, Matt Holdrege wrote: > At 09:38 AM 12/2/97 -0500, Jason Nealis wrote: > > > > Actually right now what I do it via SNMP, But I still have to telnet > >to each box and do the nvram, Cause the SysReset variable is only > >in the I branch (UGH COUGH COUGH DAMMIT), But once 6.0 comes up > >you can use this upgrade as many boxes as needed but you need CMU's > >SNMP installed to do it. > > Cough, Cough. CMU??? I'm pretty sure I tested this with Openview a while > back. It should also work fine with Navis Access. Unless I'm missing > something? > > Matt Holdrege <A HREF="http://www.ascend.com">http://www.ascend.com</A> matt@ascend.com > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg11324.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG></LI> <UL> <LI><EM>From</EM>: Matt Holdrege <matt@ascend.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11327.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11329.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11337.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11276.html">Re: (ASCEND) Max 5.0Ap36</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11328"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd256.html#11328"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>