Configuration: RAS ---> ISDN ---> MAX 200+ ---> Ether ---> UNIX-Host NT EURO- RADIUS TOKEN ISDN ACE/SERVER PROBLEM: We got no connection from our WinNT-Client to the ACE/SERVER; no activity was recorded in the ACE/SERVER log-file. The pincode was not accepted at all. First we tested the RADIUS-ACE/SERVER connection with radpwtst. A user was connected with normal challenge/response procedure. Second a connection from the RAS-client to RADIUS was established, too. QUESTION: How do we have to setup MAX/RADIUS and ACE/SERVER to get a connection from a RAS-client? Configuration-Files? Any experience with it? - Net 255.255.255.224 - RAS System: WinNT 4.0 (Server/SP3) ISDN-Card: AVM/Fritz! Protocol: TCP/IP, PPP (WinNT/Internet) - MAX 200+ Software: Version 5.0Ap33 Config: Ethernet->Answer: Profile Reqd (Yes) ... (default) Ethernet->Answer->Encaps: default Ethernet->Answer->PPP Options: Recieve Auth (PAP) ... (default) Ethernet->Mod Config->Ether options: IP Adrs (valid ip) ... (default) Ethernet->Mod Config->Auth: Auth (RADIUS) Auth Host#1/2/3 (valid ip) Auth Port (1645) Auth Timeout (30) Auth Key (...) ... (default) Conn-Prof: Ethernet->Connections->... Station (secuid00) Active (Yes) Encaps (PPP) ... (default) Ethernet->Connections->...->Encaps Opt. Send Auth (None) Recieve PW (...) ... (default) - UNIX-Host System: SUN Sparc 5/Solaris 2.5.1 - RADIUS Type: Ascend Access Control Version: r1_0Ap2 Location: /etc/raddb Client-File: # RADIUS CLIENTS CONFIGURATIONS # Ascend MAX 200+ (valid-ip) ... type=Ascend:NAS Users-File: # RADIUS USERS PROFILES secuid00 Authentication-Type = ACE, Ascend-Token-Expiry = 540, Ascend-Token-Idle = 60, Ascend-Token-Immediate = Tok-Imm-No, Service-Type = Framed, Framed-Protocol = PPP, Framed-IP-Address = ..., Framed-IP-Netmask = 255.255.255.224, Ascend-Idle-Limit = 300 - ACE/SERVER Version: 3.01 User: secuid00 with assigned TOKEN Client: gonzo Config: sdconf.rec -> /etc/raddb MfG scc-tech@de.uu.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11427.html">(ASCEND) Ascend software releases on WWW gripe</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11424.html">(ASCEND) New P75:s available in Sweden?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg12429.html">Re: (ASCEND) New P75:s available in Sweden?</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11623.html">Re: (ASCEND) Authentication MAX200+, RADIUS, ACE/SERVER problem</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail41.html#11426"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd269.html#11426"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>