I need to add a second PVC to my Cisco 2501 frame relay port. Here is my current config: interface Serial0 ip address 165.113.2.90 255.255.255.0 no ip mroute-cache encapsulation frame-relay no fair-queue frame-relay map ip 165.113.2.17 17 broadcast IETF ! Here is my guess on what I should change it to: interface Serial0 no ip address encapsulation frame-relay ! interface Serial0.1 point-to-point description Link to CRL - San Francisco ip address 165.113.2.90 255.255.255.0 no ip mroute-cache no fair-queue frame-relay map ip 165.113.2.17 17 broadcast IETF ! interface Serial0.2 point-to-point description Link to Tuttle & Co - Gig Harbor, WA ip unnumbered Ethernet0 no ip mroute-cache no fair-queue frame-relay map ip 32.71.253.234 255.255.255.224 21 broadcast IETF ! I got some of this from a FAQ at Ascend. Does this have a chance of working? Thanks, Steve LaDuke Tuttle & Co. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <HR> <STRONG>Follow-Ups</STRONG>: <UL> <LI><STRONG><A HREF="msg11860.html">Re: (ASCEND) Pipline 130 FR--> Cisco 2501</A></STRONG></LI> <UL> <LI><EM>From</EM>: Joe Shaw <jshaw@insync.net></LI> </UL> </UL> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11856.html">Re: (ASCEND) 5.0Ap38 for the MAX products</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11851.html">Re: (ASCEND) [Fwd: Dave Lowe]</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11853.html">(ASCEND) Re: Recommendations for a new router...</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11860.html">Re: (ASCEND) Pipline 130 FR--> Cisco 2501</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11854"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd284.html#11854"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>