interface Serial4/5 description TW Frame Relay Cloud no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi ! interface Serial4/5.1 point-to-point ip address xxx.xxx.xxx.xxx 255.255.255.252 no cdp enable frame-relay interface-dlci 19 IETF Your config may vary slightly depending on your frame cloud provider. I've got 2 different frame clouds I use here, and both are setup different. Also, remember that if you accidently don't put the sub interface as point to point right off the bat and fixing it as an afterthought, you'll have to reboot the router to get it to use the sub-interface as point-to-point. Regards, Joe Shaw - jshaw@insync.net NetAdmin - Insync Internet Services Fortune for the day: "Speak softly and carry a +6 two-handed sword." On Fri, 19 Dec 1997, Steve LaDuke wrote: > I need to configure a Cisco 2501 to talk to my Pipeline 130 (T1, Frame > Relay.) > The Pipeline 130 seems easy to configure. It is already > sending packets onto the frame-relay network. > > I need to add a second PVC to my Cisco 2501 frame relay port. > > Here is my current config: > interface Serial0 > ip address 165.113.2.90 255.255.255.0 > no ip mroute-cache > encapsulation frame-relay > no fair-queue > frame-relay map ip 165.113.2.17 17 broadcast IETF > ! > > Here is my guess on what I should change it to: > interface Serial0 > no ip address > encapsulation frame-relay > ! > interface Serial0.1 point-to-point > description Link to CRL - San Francisco > ip address 165.113.2.90 255.255.255.0 > no ip mroute-cache > no fair-queue > frame-relay map ip 165.113.2.17 17 broadcast IETF > ! > interface Serial0.2 point-to-point > description Link to Tuttle & Co - Gig Harbor, WA > ip unnumbered Ethernet0 > no ip mroute-cache > no fair-queue > frame-relay map ip 32.71.253.234 255.255.255.224 21 broadcast > IETF > ! > I got some of this from a FAQ at Ascend. > > Does this have a chance of working? > Thanks, > > Steve LaDuke > Tuttle & Co. > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg11854.html">(ASCEND) Pipline 130 FR--> Cisco 2501</A></STRONG></LI> <UL> <LI><EM>From</EM>: Steve LaDuke <steve_laduke@tuttle.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11862.html">Re: (ASCEND) TNT 672 modems, DS3 Channelized</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11859.html">Re: (ASCEND) K56 and X2</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11854.html">(ASCEND) Pipline 130 FR--> Cisco 2501</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11867.html">Re: (ASCEND) Pipline 130 FR--> Cisco 2501</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11860"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd284.html#11860"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>