> I have a pair of Pipeline 75 boxes, and am trying to get single-address > NAT running using 5.1Ap6. I'm unable to pass even the first step. > On the remote (Internet-connected) box, I have: > > My Name=office > My Addr=208.155.20.83/24 > Rem Name=home > Rem Addr=208.155.20.86/30 > > On the local (to be running NAT) box, I have: > > My Name=home > My Addr=192.168.216.100/24 > Rem Name=office > Rem Addr=208.155.20.83/24 > > The "home" box is never able to connect to the "office" box in this > configuration. > > I realize that the first response to the above configuration is > likely to be "Your Rem Addr on the office box and My Addr on the > home box do not match." And, indeed, if I make that change, they > connect just fine. But if the home box is given the 208.155.20.86 > IP address, then it would not have an IP address on it's connected > LAN, thus defeating the entire purpose. Unless I'm misunderstanding > something. you're sure the subnetting is right? Here's my interpretation of your home subnet: input results sample host IP mask length mask 255.255.255.252 208.155.20.86 30 network address 208.155.20.84 first host IP 208.155.20.85 last host IP 208.155.20.86 broadcast address 208.155.20.87 1. The home net is part of the office net. You will get all of the office broadcasts, right? 2. You do have 2 IPs available, one for the router and one for the host. We commonly subnet a remote LAN with a /30 mask if there will only be one host. But the remote LAN is a different Class C network. Feedback? Best regards, Wolfgang _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- B E N E I C K E EDV-Beratung ________________________________________________________________________ Netzwerk-Design - 3Com Solution Partner ISDN Remote Access - ASCEND Vertrieb DIGITAL Partner PC-Systeme und Server ApplePoint Windows NT-Netzwerke Workstation Memories and Storage Solutions Dr. Wolfgang Beneicke fon +49-6223-48126 Fasanenstrasse 16, D-69251 Gaiberg fax +49-6223-5708 ...near world famous Heidelberg, Germany _-_-_-_-_s-c_h-n_i-p_p_-_-_-_-_-_-_-_-_-_--_-_-_-_-_-_-_-_z-a_c-k_-_-_-_ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11935.html">(ASCEND) Warning 175 with 5.0Ap36 eik.m40</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11954.html">Re: (ASCEND) ATM MTU 64 KB ?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg12078.html">(ASCEND) Re: Pipeline 75<-->75 and NAT.</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11910.html">(ASCEND) Fatal Error Index:2001</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail6.html#11939"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd286.html#11939"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>