Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Max 4002 and Pipeline 75
Hello,
I have a Max 4002 running 5.0Ai8. It has 2 networks being routed
over it with static routes: 208.130.99/24 and 206.151.124/23. I'm trying
to give a Pipeline 75 running 5.0Ap8 a network of 206.151.125.16/28.
Here is my current configuration:
On the Max, I've created a connection profile that looks like this.
Station=devisdn1
Encaps=MPP
PRI # Type=National
Dial #=N/A
Calling #=8052 /* Note that this number is so short b/c I am
dialing over my PBX instead of the public network. */
Called #=8052
Route IP=Yes
Bridge=No
Dial brdcast=N/A
Shared Prof=No
Encaps options...
Send Auth=PAP
SendPW=whatever
....
Ip options....
LAN Adrs=206.151.125.17/28
WAN Alias=0.0.0.0
IF Adrs=0.0.0.0/0
...
RIP=Off
...
...
On the Pipe75, i've created a connection profile that looks like this.
Station=ascend
Active=Yes
Encaps=MPP
Dial #=7559
Calling #=8052
Called #=
Route IP=Yes
Route IPX=N/A
Bridge=No
Dial brdcast=N/A
Encaps options...
Send Auth=PAP
Send PW=whatever
...
Ip options...
LAN Adrs=208130.99.1/24 /* I'm unsure of this */
I haven'te ven gotten far enough to say it's a routing problem. What
happens is when the pipe75 dials the Max, here is what I see on both the
pipe75 and the max 4002's status windows.
Pipe75: Outgoing Call Max 4002: Assigned
to port
7559 8052
Call Connected Call
Connected
Call Terminated Call
Terminated
I'd really appreciate any help that I could get in this. The BRI line
itself works fine as a pipe25 with a single static can dialin and
connect fine.
Thanks,
Jason Ledbetter
Network Technical Specialist
Applied Computer Technologies
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>