(ASCEND) Ascend-Idle-Limit and radius

["Dwyer, John" <JTD1@pge.com>]

Hi,
I'm trying run RadiusNT (from emerald) , using it with an Ascend
MAX-1800 host and Pipeline 75 remotes.

I'm trying to get the "Ascend-Idle-Limit" attribute to work correctly.
When I define the "test" profile on the MAX, with a Sessions/Idle
setting = 120, the connection drops after 120 seconds with no traffic.
When I turn off the profile
off, and allow authentication via RadiusNT, it connects OK, but does not
disconnect. 

This is what my users file looks like:

test	Password = "test"
	User-Service = Framed-User,
	Framed-Protocol = MPP,
	Framed-Address = xxx.xxx.xxx.xxx,
	Framed-Netmask = xxx.xxx.xxx.xxx,	
	Ascend-Bridge = Bridge-Yes,
	Ascend-Route-IP = Route-IP-No,
	Ascend-Idle-Limit = 120

Any ideas what I am missing?

thanks,
John Dwyer
PG&E
jtd1@pge.com



++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>

---

• Prev by Date: Re: (ASCEND) Cause Code 35
• Next by Date: Re: (ASCEND)Help-Connect Speeds-56K
• Prev by thread: Re: (ASCEND) Cause Code 35
• Next by thread: (ASCEND) site rework gripe...
• Index(es):
  • Main
  • Thread