Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Cisco / MAX4000 callback ?
i see your dialoutnumber "Ascend-Dial-Number" starts with a "0"
dont u use trunk-groups for dialing from the max??
i thought you allways need trunk-groups for dialing :-/
maybe you want to try the trunks??
thats what we do (of course not to a cisco ;) for call-back!
and it mainly works
----------------------------------------------------------------------------
Kamil Ince
SNI CC IT Networks, GS Koeln
mail: ince@rw.sni.de, tel: +49 221 679-2173, fax: -1995
It may be my fault, but it's not my problem
----------
> From: Pierre-Yves Kerembellec <Pierre-Yves.Kerembellec@vtcom.fr>
> To: ascend-users@max.bungi.com; support@ascend.com
> Subject: (ASCEND) Cisco / MAX4000 callback ?
> Date: Dienstag, 20. Mai 1997 18:08
>
> Hi !
>
> I'm trying to get the following connection working :
>
> 1) a Cisco 2003 call a MAX4000, and successfully passes
> CHAP authentication (I use a 'ppp authentication chap callin'
> at the Cisco side ...)
>
> 2) the MAX4000 hang-up, then callback the configured number
>
> 3) the Cisco answers the call and re-authenticate using CHAP
> again
>
> Phase 1 works fine
> Phase 2 does not happen, because the MAX _NEVER_ terminates the call !
>
> I've got the following RADIUS profile :
>
> thecisconame Password = "thepassword"
> User-Service = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 193.XXX.XXX.14,
> Framed-Netmask = 255.255.255.248,
> Ascend-Idle-Limit = 900,
> Ascend-Callback = Callback-Yes,
> Ascend-Send-Auth = Send-Auth-PAP,
> Ascend-Send-Passwd = "thepassword",
> Ascend-Dial-Number = "014612XXXX",
> Ascend-Data-Svc = Switched-64K
>
> Why does my MAX never callback the Cisco ?
> What sofware image do I need to support callback ?
> (currently running 5.0Ap7, eim.m40)
> How can I test that the MAX4000 is able to dialout ?
> (used 'test #number' under TermServ, but this failed)
> Do you have some profile examples that works ?
>
> NB: I cannot use CLID authentication since the Cisco won't
> validate callback until fully authenticated wia PAP or CHAP
> to the other end ...
>
> NB2: if I don't use the callback feature, all goes like a charm !
> (I mean, the Cisco perfectly connect to the MAX4000, and correctly
> aggregate the second B channel when needed)
>
> Please, help me, I'm getting crazy about that !!! ;-)
> Pierre-Yves
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Pierre-Yves KEREMBELLEC Phone # +33 1 46 12 67 50
> VTCOM Fax # +33 1 46 12 67 00
> 40, rue Gabriel Crie E-mail pyk@vtcom.fr
> 92245 Malakoff Cedex, France Systemes et Reseaux
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
> or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups: