Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) P75 takes longer and longer to connect
I don't have a solution other than just regularly
rebooting the pipeline, but FWIW:
I have a remote user with an ISDN TA dialing _TO_
a P50 that gets the same increasing negotiation delays
after about 2 weeks of uptime on the pipeline,
his negotiation delay is increased by about _30_seconds_...
reboot the pipeline and he can again connect in about 2-3 seconds.
-jim h
At 02:24 05/22/1997 GMT, Bill Lutton wrote:
>Hi all,
>
>I connect to a Portmaster w/5BRI card with my P75.
>My problem is that the P75 takes progressively longer to
>negotiate with the Portmaster. After a reset, the P75
>negotiates the link in just under 2 sec. After 30 or so
>connect the negotiation time is up to 5 sec.
>
>An abridged syslog output is included below, generated by
>manually calling & disconnecting in succession. Notice the
>negotiation starts out at ~2 sec and by the 28th call is
>up to ~5 sec.
>My questions:
>
>Why does the P75 retransmit the first frame?
>
>Why does the retransmit take longer on successive calls?
>
>Is there anything I can do to get the P75 to consistantly
>connect quickly to this Portmaster?
>
>Thanks in advance,
>Bill
----
Jim Howard jhoward@lyceum.com
Sr Network Engineer 404.248.1733
Lyceum Internet http://www.lyceum.com/
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups: