Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Problem with DOV calls on a MAX TnT
Matt,
==> In the connection profile, under telco, did you set data=voice?
Yep. I tried this and it still doesn't work. I would rather
not do this as this is going to be used for a Dynamic Dial-up
and I would prefer to keep Connection Profiles out of the
picture. (I did try it though)
I have since upgraded to rev 1.2Ai3 (to get support for V.120). While it
has helped a bit, still no DOV.
Carl
==>
==> At 10:18 AM 5/25/97 -0400, Carl Caira wrote:
==> >Greetings,
==> >
==> >I have sent Ascend my logs, output from debug modes, and I have an
==> >open ticket with them, but.....:-P
==> >
==> >I have a MAX TnT, ver 1.2Ap2 with an 8port T1 card (slot 1), a
==> >192 channel HDLC card (slot 4), and a 48 modem port card (slots
==> >2 & 3). I have built a Call-Route profile so that all incoming
==> >calls are sent through the HDLC card (it is currently a dedicated
==> >ISDN box) and we are using RADIUS to authenticate.
==> >
==> >The ISDN connections work fine for 64K or 56K calls but when a
==> >Data-Over-Voice call comes in, the HDLC card doesn't negotiate
==> >it or authenticate it. It just hangs for approx 20 seconds and
==> >then terminates the call.
==> >
==> >My testing devices are a Bitsurfr Pro (win95, winnt 4.0, etc) and
==> >a Pipeline 50. Both work well if I dial into my MAX 4000s with PRIs,
==> >and I have plugged the TnT PRIs into these MAX's to be sure it's
==> >not the PRIs themselves. From what I remember, I had to do nothing
==> >special to get the 4000s to negotiate a DOV call.
==> >
==> >I tried taking the modems out, thinking this might have something to
==> >do with it as initially the modems were answering the DOV calls, but
==> >now that I have the Call-Route profile in place, they are routed to
==> >the HDLC card. The debug logs show the call being routed correctly
==> >and it appears to me that the TnT just cannot handle DOV calls.
==> >
==> >Any thoughts, comments or suggestions?
==>
==> In the connection profile, under telco, did you set data=voice?
==>
==>
==> Matt Holdrege - http://www.ascend.com - matt@ascend.com
==> ++ Ascend Users Mailing List ++
==> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
==> To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
==> or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
==>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups:
References: