MAX---PRI---Telco---SW56---router If the router dials into the MAX using in-band signaling, will the MAX autodetect that the incoming call is a switched 56 call, and it will switch to in-band signaling instead of the D channel? My MAX can accept ISDN and analog calls already. If the MAX autodetects the switched 56 calls, then I guess I don't have to configure my MAX to accept SW56 calls at all. Thanks, Chris >>Hi, >>Does anyone know how to setup the MAX 4004 to accept switched 56 >>calls? > >Nothing different to accepting any other kind of calls... > >>Is there a cheat sheet somewhere I can take a look at? >>Has anyone tried this at all, and what kind of equipment do >>you use to dial into the max over switched 56? > >You mean a 56K data call originating from a non-ISDN node ? >Is the MAX on ISDN lines ? > >The call is presented to the MAX as a 56K bearer data call (assuming >telco didn't make any mistakes with provisioning). The call is >treated as any other data call and forwarded to an HDLC controller >slot.... > >>Do you also know how the MAX knows the difference between an >>ISDN call and a switched 56 call? > >In most cases it doesn't care and doesn't matter either....what >specifically are you concerned with ? > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <HR> <STRONG>Follow-Ups</STRONG>: <UL> <LI><STRONG><A HREF="msg00092.html">Re: (ASCEND) switched 56 setup on max 4000 (fwd)</A></STRONG></LI> <UL> <LI><EM>From</EM>: David Lesher <wb8foz@nrk.com></LI> </UL> <LI><STRONG><A HREF="msg00089.html">Re: (ASCEND) switched 56 setup on max 4000 (fwd)</A></STRONG></LI> <UL> <LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI> </UL> </UL> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg00083.html">Re: (ASCEND) Single login (fwd)</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg00079.html">(ASCEND) Autentication after network down</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg00079.html">(ASCEND) Autentication after network down</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg00089.html">Re: (ASCEND) switched 56 setup on max 4000 (fwd)</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail10.html#00082"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd5.html#00082"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>