We have successfully installed radius and it is communicating to our MAX TNT and autenticating people. However it is doing this really slowly, we can't seem to find any problems other than the radiusd seems to validate the users 3 or 4 times thus when login and password are given it takes about 60 seconds to validate and login a user. We are using the Ascend radiusd version 970424 on SunOS 4.1.4. Below is a debug output, Has anyone seen this problem and do they know of a fix? > > root@beaker[/etc/raddb]# radiusd -x > May 13 15:55:15.069 radiusd[1061] Debugging enabled > May 13 15:56:13.851 radiusd[1061] New request: ctf-2.access.colt.net.1997, id=16 > May 13 15:56:13.855 radiusd[1061] handle_radius_request: ctf-2.access.colt.net.1997, id=16, > code=1, length=97 > May 13 15:56:13.857 radiusd[1063] fork in rad_spawn_child (child) > May 13 15:56:13.860 radiusd[1061] fork in rad_spawn_child (parent) > request: User-Name = "levine" > request: Password = "*password*" > request: NAS-Identifier = 195.110.64.12 > request: NAS-Port = 31 > request: NAS-Port-Type = Async > request: User-Service = Login-User > request: State = "" > request: Ascend-Third-Prompt = "" > request: Caller-Id = "x" > request: Client-Port-DNIS = "7204" > request: Acct-Session-Id = "232376835" > May 13 15:56:13.874 radiusd[1063] rad_authenticate > May 13 15:57:13.755 radiusd[1061] Killing child pid 1063 > May 13 15:57:13.763 radiusd[1061] New request: ctf-2.access.colt.net.1997, id=16 > May 13 15:57:13.765 radiusd[1061] handle_radius_request: ctf-2.access.colt.net.1997, id=16, > code=1, length=97 > May 13 15:57:13.768 radiusd[1065] fork in rad_spawn_child (child) > request: User-Name = "levine" > request: Password = "*password*" > request: NAS-Identifier = 195.110.64.12 > request: NAS-Port = 31 > request: NAS-Port-Type = Async > request: User-Service = Login-User > request: State = "" > request: Ascend-Third-Prompt = "" > request: Caller-Id = "x" > request: Client-Port-DNIS = "7204" > request: Acct-Session-Id = "232376835" > May 13 15:57:54.950 radiusd[1063] Child process exiting normally > May 13 15:58:34.785 radiusd[1065] User record PASSWORD type is Radius > May 13 15:58:34.787 radiusd[1065] authPapPwd > May 13 15:58:34.788 radiusd[1065] authPapPwd: authPwd encrypted: xxxx > > May 13 15:58:34.788 radiusd[1065] authPapPwd: authPwd decrypted: xxxx > > May 13 15:58:34.791 radiusd[1065] send_accept: ctf-2.access.colt.net.1997, id=16 > reply: User-Service = Framed-User > reply: Framed-Protocol = PPP > reply: Framed-Address = 195.110.67.1 > reply: Framed-Netmask = 255.255.255.0 > reply: Ascend-Metric = 2 > reply: Framed-Routing = None > reply: Ascend-Idle-Limit = 30 > May 13 15:58:49.800 radiusd[1065] Child process exiting normally > As you can seen it does authenticate fine, but it takes over 60 seconds. This is not good. Regards, Neil. -- Neil J. McRae - Alive and Kicking. C O L T I N T E R N E T neil@COLT.NET Free the daemon in your <A HREF="<A HREF="http://www.NetBSD.ORG/">http://www.NetBSD.ORG/</A>">Computer!</A> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg00233.html">Re: (ASCEND) Single login</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg00231.html">(ASCEND) K56flex connect rate reporting?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg00320.html">Re: (ASCEND) K56flex connect rate reporting?</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg00233.html">Re: (ASCEND) Single login</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail166.html#00248"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd11.html#00248"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>