>Hi Kevin > >I'm going to be ordering the 56k modems for my Max 4k. > >Can I just replace the cards and do the software upgrade later? No. The firmware to download into the K56flex modems is resident in the MAX software image. For that reason, when you upgrade the hardware, you will also need to load the image (see below). Currently this is available under the patch branch "Ap6". There is also an "i" load for those who are running in the "i" branch "Ai10". The loads needed has a "k" designation in the first part of the file name, for example: "tik.m40" - for the T1 (t) MAX 40XX (m40) IP-only (i)with support for K56flex modems (k). >Can they work at 33.6 under the old software? The old DM-8 and DM-12 cards are not supported in the "k" loads. The two different types of modems will continue to be supported with different binaries for the foreseeable future. Further example: If you are currently running a MAX4004 T1 with the OSPF load (IP only) you probably load one of the images: ti.m40 or tbi.m40 (b - denotes optional BRI support) With the upgrade to series56 modems you would now use: tik.m40 or tbik.m40. Kevin Smith Updated Service and Support Ascend Communications Resources are now at: <A HREF="http://www.ascend.com/service">http://www.ascend.com/service</A> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg00242.html">(ASCEND) Pipeline ISDN routers...</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg00244.html">Re: (ASCEND) K56flex connect rate reporting?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg00267.html">Re: (ASCEND) multiple accounting records</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg00242.html">(ASCEND) Pipeline ISDN routers...</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail3.html#00251"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd11.html#00251"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>