Has anyone on this list tried to get the IP direct feature working.
I have the following profile:
elmail Password = "******"
User-Service = Framed-User,
Ascend-IP-Direct = 10.0.0.1,
Ascend-Bridge = Bridge-No,
Framed-Protocol = PPP,
Framed-Route = " **************** ",
Ascend-Metric = 2
The ascend is on 10.0.0.2. I've put ***** to obliterate information that
I don't consider relevent here.
If I trace the ethernet and ping, for instance, 10.0.0.3, I rekon that I
should see all the MAC destination addresses of each packet that comes
into the network from the dialup being that of 10.0.0.1, however
_actually_, the destination is 10.0.0.3.
In other words, IP direct doesn't seem to work.
Now, I'm fairly sure that I must have made a mistake somewhere. Has
anyone discovered the trick to getting it working.
I'm running 5.0Ai4 on an 1800.
Cheers,
Daniel
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>>
or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg00656.html">(ASCEND) Ascend Hardware Forsale</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg00653.html">Re: (ASCEND) Callback doesn't work if too quick (5.0A)</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg00654.html">(ASCEND) Max 200+: Callback with WinNT RAS</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg00656.html">(ASCEND) Ascend Hardware Forsale</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="maillist.html#00655"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd25.html#00655"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>