Here's the users file entry I ended up with. Some settings may be unnecessary, but it's what worked for me in our environment: testuser Password = "UNIX" User-Service = Framed-User, NAS-Port-Type = ISDN-Sync, Framed-Protocol = MPP, Framed-Compression = Van-Jacobsen-TCP-IP, Ascend-Maximum-Channels = 2, Ascend-Link-Compression = Link-Comp-MS-Stac, Framed-Routing = None, Ascend-Assign-IP-Pool = 1, Ascend-Idle-Limit = 5400 Good luck, Dave Wells On Wed, 28 May 1997, jay poley wrote: > Date: Wed, 28 May 1997 15:49:36 -0400 > From: jay poley <jpoley@icon.com> > To: ascend-users@max.bungi.com > Subject: (ASCEND) Compression > > I was wondering if ANYONE has Stac Compression working on the Max 4004? > I have a Max 4004 (software level +5.0Ai9) and three devices that > connect to it but do not negotiate compression? an Ascend Netwarp 128 > isa card, a CISCO 202 ISDN isa card, and a pipeline 130. > I am not able to get any of the devices connected with compression. > > is there any know problems with STAC? or compression between vendors? > i am able to get 4:1 compression between 2 cisco products? > > if you use compression for ISDN at all,... please e-mail me and let me > know! > > thanks > jason poley > <A HREF="http://www.icon.com">http://www.icon.com</A> > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> > or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg00662.html">(ASCEND) Compression</A></STRONG></LI> <UL> <LI><EM>From</EM>: jay poley <jpoley@icon.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg00671.html">Re: (ASCEND) Max 200 Freeze w/ 5.0A</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg00668.html">Re: (ASCEND) restricting 1-800 access to certain users</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg00662.html">(ASCEND) Compression</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg00522.html">Re: (ASCEND) Analog Multilink PPP and RAS (fwd)</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#00670"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd21.html#00670"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>