Another MAX is connected to a channelized T1 line. Do I have to do something different? and will all the conversions still take place at the CO? MAX---Channelized T1---Telco---SW56---Router Thanks for your help, Chris >>Here's my setup: >> >> MAX---PRI---Telco---SW56---router > > ^^^^^^^ ^^^^^^^^^^ > ISDN Sig Inband Sig > >>If the router dials into the MAX using in-band signaling, >>will the MAX autodetect that the incoming call is a switched >>56 call, and it will switch to in-band signaling instead >>of the D channel? > >No. The telco does all of the translation. When an inband >56K call transverses a switch (telco) and is routed onto a >PRI line, the telco does all of the translation needed. The call >is presented to the MAX as a 56K data call - exactly as it would >if the call was originated as an ISDN 56K data call. The MAX talks >to the switch over the D-channel, and the switch talks to the sw56 >router with inband signalling. The data is unaffected by the change >in signalling method. > >>My MAX can accept ISDN and analog calls already. If the >>MAX autodetects the switched 56 calls, then I guess I don't >>have to configure my MAX to accept SW56 calls at all. > >Correct. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <HR> <STRONG>Follow-Ups</STRONG>: <UL> <LI><STRONG><A HREF="msg04581.html">Re: (ASCEND) switched 56 setup on max 4000</A></STRONG></LI> <UL> <LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI> </UL> </UL> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg04580.html">Re: (ASCEND) Single login (fwd)</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg04578.html">Re: (ASCEND) Single login (fwd)</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg04559.html">Re: (ASCEND) switched 56 setup on max 4000</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg04581.html">Re: (ASCEND) switched 56 setup on max 4000</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail173.html#04579"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd5.html#04579"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>