Here's the users file entry I ended up with. Some settings may be
unnecessary, but it's what worked for me in our environment:
testuser Password = "UNIX"
User-Service = Framed-User,
NAS-Port-Type = ISDN-Sync,
Framed-Protocol = MPP,
Framed-Compression = Van-Jacobsen-TCP-IP,
Ascend-Maximum-Channels = 2,
Ascend-Link-Compression = Link-Comp-MS-Stac,
Framed-Routing = None,
Ascend-Assign-IP-Pool = 1,
Ascend-Idle-Limit = 5400
Good luck,
Dave Wells
On Wed, 28 May 1997, jay poley wrote:
> Date: Wed, 28 May 1997 15:49:36 -0400
> From: jay poley <jpoley@icon.com>
> To: ascend-users@max.bungi.com
> Subject: (ASCEND) Compression
>
> I was wondering if ANYONE has Stac Compression working on the Max 4004?
> I have a Max 4004 (software level +5.0Ai9) and three devices that
> connect to it but do not negotiate compression? an Ascend Netwarp 128
> isa card, a CISCO 202 ISDN isa card, and a pipeline 130.
> I am not able to get any of the devices connected with compression.
>
> is there any know problems with STAC? or compression between vendors?
> i am able to get 4:1 compression between 2 cisco products?
>
> if you use compression for ISDN at all,... please e-mail me and let me
> know!
>
> thanks
> jason poley
> <A HREF="http://www.icon.com">http://www.icon.com</A>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>>
> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>>
or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<HR>
<STRONG>References</STRONG>:
<UL>
<LI><STRONG><A HREF="msg05143.html">(ASCEND) Compression</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: jay poley <jpoley@icon.com></LI>
</UL>
</UL>
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg05152.html">Re: (ASCEND) Max 200 Freeze w/ 5.0A</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg05149.html">Re: (ASCEND) restricting 1-800 access to certain users</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg05143.html">(ASCEND) Compression</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg12442.html">(ASCEND) Compression</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail292.html#05151"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd22.html#05151"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>