Ray / Paul, This definitely seems to be TR#2140, which is the CLID/Callback issue on Pipelines (not MAX) where the Pipeline would call back before clearing the incoming call. I tested 5.0Ap8 on the P50 and it does work, although that didn't make it into the release notes. Best Regards, Marc. ray @ carpe.net on 05/28/97 05:34:27 PM To: rol @ oleane.net cc: ascend-users @ bungi.com (bcc: ascend_users_list/Ascend/US) Subject: Re: (ASCEND) Callback doesn't work if too quick (5.0A) Nope - still get a LAN security error. Thanks for the try, though! Ray > Try to set the > Use Default Answer Profile > to No in the Max2000 configuration, and repeat your test.... > I'd really like to know ;-) > Paul > Dans son message (In his/her message), Ray Davis ecrivait (wrote) : > > We have a problem where some P50s set to callback can connect to our > > Max by itself with no problem, but when we dial it and it calls back > > we get a LAN security error. > > > > Max2000/E1 (5.0A) with a connection profile to a P50: > > AnsOrig=Both > > Callback=No > > Exp Callback=Yes > > > > A P50 (4.6Cp11 or 5.0A) with a connection profile to the Max: > > AnsOrig=Both > > Callback=Yes > > Exp Callback=No > > > > When the Max initiates a call to the P50 its syslog says: > > > > May 28 13:41:31 max2000 ASCEND: slot 5 port 1, Outgoing Call, 01234567890 > > May 28 13:41:36 max2000 ASCEND: slot 0 port 0, line 1, channel 19, Incoming Call, 1239999990 > > May 28 13:41:36 max2000 ASCEND: slot 5 port 2, Assigned to port, 1239999990 > > May 28 13:41:38 max2000 ASCEND: slot 5 port 2, line 1, channel 19, Call Connected, 1239999990 > > May 28 13:41:38 max2000 ASCEND: call 78 AN slot 5 port 2 64K 987600 > > May 28 13:41:41 max2000 ASCEND: slot 5 port 2, LAN security error, custp50 > > May 28 13:41:41 max2000 ASCEND: slot 5 port 2, Call Terminated > > May 28 13:41:41 max2000 ASCEND: call 78 CL 0K c=101 p=67 > > May 28 13:41:51 max2000 ASCEND: call 77 CL 0K c=2 p=2 > > May 28 13:41:51 max2000 ASCEND: slot 5 port 1, Call Terminated > > May 28 13:41:51 max2000 ASCEND: slot 0 port 0, line 1, channel 2, No Connection > > > > If I initiate a call to the P50 using ^D 1 and then immediately > > kill it with ^D 2 before the callback comes it then there is no > > problem. > > > > These same P50 profiles worked with callback just fine with a P400 > > running 4.5. > > > > Note that the number the Max dials is different than the number the > > P50s dial back in with, but Dial and Calling number are set up > > properly or the P50s would never get a LAN session up. > > > > Any ideas? Is this a known problem? > > > > Thanks, > > Ray > > ___ > > Ray Davis carpeNet Information Technologies GmbH > > ray@carpe.net <A HREF="http://www.carpe.net/">http://www.carpe.net/</A> +49-6192-901440 +49-6192-901441 fax > > ---------------------* carpe diem... carpe net! *------------------------ > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > > To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> > > or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> > > > Paul Rolland, rol@oleane.net > OLEANE SA/Service Technique/Responsable Backbone & Telecom > OLEANE SA/Technical Service/Backbone & Telecom Manager > -- > Support technique et operationnel Oleane : support@oleane.net > Gestion du service des news et des feeds : newsmaster@oleane.net > Test du mail : ping@oleane.net > Informations commerciales sur Oleane : info@oleane.net > Please no MIME, I don't read it - Pas de MIME, je ne le lis pas > If a train station is where a train stops, what is a workstation then ? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.shore.net/~dreaming/ascend-faq">http://www.shore.net/~dreaming/ascend-faq</A>> or <<A HREF="ftp://ftp.shore.net/members/dreaming/ascend-faq.txt">ftp://ftp.shore.net/members/dreaming/ascend-faq.txt</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg05176.html">(ASCEND) July 1st Resource</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg05175.html">Re: (ASCEND) Number of active sessions *Question*</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg05209.html">Re: (ASCEND) Callback doesn't work if too quick (5.0A)</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg05131.html">(ASCEND) MAX 4000 stops responding</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail149.html#05188"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd27.html#05188"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>