our Max calls a customer constantly but doesn't get a connection.
I did some D channel analysis and found the following (interesting)
game:
XMIT:
NL: <proto DSS1> <callref caller 012d> <msgtype SETUP>
<Bearer Capability, cap Unrestricted digital, mode circuit, rate 64 kbps>
<Channel ident, PRI/other, preferred, B channel units, channel #01>
<Called party number, type Unknown, plan Unknown, # 0352XXXXXX
<Sending complete>
RCV:
NL: <proto DSS1> <callref callee 012d> <msgtype CALL PROCEEDING>
<Channel ident, PRI/other, exclusive, B channel units, channel #01>
<for some seconds nothing happens>
XMIT:
NL: <proto DSS1> <callref caller 012d> <msgtype DISCONNECT>
<Cause, loc U, code 10 (16)>
RCV:
NL: <proto DSS1> <callref callee 012d> <msgtype RELEASE>
XMIT:
NL: <proto DSS1> <callref caller 012d> <msgtype RELEASE COMPLETE>
<Cause, loc U, code 60 (96)>
The Max obviously disconnects the call it placed some time before by it-
self, and with cause 16 (Normal call clearing). IMHO this is weird. If
there really is a timeout because no answer is received for some time,
the Max should disconnect (if at all) using cause 102 (timer expiry),
but even that is suspicious - usually the Network will disconnect the
call sooner or later by itself. After disconnecting, the Max gets a
RELEASE without a cause, which causes the Max to respond with RELEASE
COMPLETE and cause 96 (mandatory information element missing).
After this, the game starts from the beginning.
Can anyone interpret this ? Is it a normal feature of the Max to dis-
connect its own calls during establishement ? Ah yep, there is no need
for preemption on this PRI, plenty Bs are free.
--
Kanther-Line: PGP SSH IDEA MD5 GOST RIPE-MD160 3DES RSA FEAL32 RC4
+-o-+--------------------------------------------------------+-o-+
| o | \\\- Brain Inside -/// | o |
| o | ^^^^^^^^^^^^^^ | o |
| o | Andre' Beck (ABPSoft) beck@ibh-dd.de XLink PoP Dresden | o |
+-o-+--------------------------------------------------------+-o-+
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg09418.html">Re: (ASCEND) E1 pricing</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg09416.html">(ASCEND) logins slow -- AGAIN</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg09416.html">(ASCEND) logins slow -- AGAIN</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg09419.html">(ASCEND) Two default routes?</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail25.html#09417"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd193.html#09417"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>