On the server side, set Framed-Address to 10.1.55.2 (that is, if you use what I gave you) ALSO, set Framed-Netmask to 255.255.255.252 > -----Original Message----- > From: Steven Guerin > Sent: Tuesday, October 07, 1997 6:55 PM > To: 'Jesse Martinez'; Julian Cowley > Cc: Daniel Wesemann; ascend-users@bungi.com > Subject: RE: (ASCEND) P50 > > I know this thread has somehow been mixed up with another one, so I > think I'm replying to the correct message, and I have changed the > Subject to reflect the correct situation :-) > > OK...with all that said, try this...it's a pretty simple procedure, > and it works: > > In this user's Radius profile, set Ascend-PPP-Address to, say, > 10.1.55.1 > (that's it for the server side) > > Now, on the P50 (with software version 4.6C or higher)... > Under configure... > set the "Rem Addr" to 10.1.55.1/30 > > Ethernet-->Connections--> (connection name) --> IP options > set the "IF Adrs" to 10.1.55.2/30 > set Private=YES > > === > Steven Guerin <<A HREF="mailto:sguerin@staff.communique.net">mailto:sguerin@staff.communique.net</A>> > Communiqué Technical Operations > > -----Original Message----- > From: Jesse Martinez [SMTP:jmartine@ecis.com] > Sent: Tuesday, October 07, 1997 11:17 AM > To: Julian Cowley > Cc: Daniel Wesemann; ascend-users@bungi.com > Subject: Re: (ASCEND) Q: arp problem with p50 > > I spoke to the customer and it is not the single-user version. I > tried the > Ascend-PPP-Address attribute and got the same response. If he > connects to > the first max 207.xxx.x.3 then he is ok, but a redial and > connection to > the second max 207.xxx.x.5, then he can't go or ping anywhere at > all. I > have OSPF running on all my boxes with RIP turned off. Not sure > what else > to do. Ascend tech support pointed me to the Ascend-PPP-Address > but no > go. > > > East County Internet Services, Inc > -Jess- > CFO > System Admin > > On Mon, 6 Oct 1997, Julian Cowley wrote: > > > On Fri, 3 Oct 1997, Daniel Wesemann wrote: > > > i have a little problem with a p50 (S/N 5485356) with > firmware 5.0A (Feb > > > 97). took it out of the box, configured the ether interface > to > > > 150.10.61.31/24, entered the termserv and tried a ping to > the router. > > > guess what: nothing! > > > > What is the exact model of your P50? If it ends in HX, you > have the > > "single-user" (i.e., crippled) version. > > > > The way that works is that the P50-HX takes note of the very > first MAC > > address it sees on the ethernet wire. Once set, it will only > forward > > packets from that MAC address to the upper protocol layers. > This > > effectively makes it useless on a LAN with many hosts -- you > have to > > connect it directly to your computer using a null 10Base-T > cable. > > > > Of course, this is only the way Ascend intended it to be used, > but it's > > possible to get around its limitations. A Linux system with > two ethernet > > cards can do wonders... > > > > > hours later, meanwhile with a sniffer connected to the lan, > i tried > > > again: > > > > > > ping 150.10.61.1 (the router) > > > > > > on the sniffer, i can see that the pipeline sends arp > requests like > > > crazy, and the router replies. but ping doesn't work. and > "show arp" > > > shows me an empty cache. "aah, filters", i think. and check > the setting > > > in mod-config->ether options. it is 0, which according to > the manual > > > means "disabled". > > > > > > doubting, i try the ping of last resort: > > > > > > ping 255.255.255.255 > > > > > > and see, ONE machine on the 150.10.61.x lan responds. it is > 150.10.61.3. > > > no idea why this one and not the others. on the sniffer, i > can see all > > > the workstations on my 150.10.61.x lan sending arp requests > for my > > > pipeline. the pipeline doesn't respond. "show arp" gives me > just one > > > entry: the one for 150.10.61.3. > > > > > > after the entry got washed out of the arp cache, i tried the > broadcast > > > ping again. this time, the one responding was 150.10.61.21, > again with > > > only this entry in "show arp". > > > > > > 150.10.61.21 is one of our management stations and has a > tftp server. so > > > i kept pinging to keep the arp cache alive and grabbed a new > firmware > > > from the ascend server: b.p50 (5.1A). installed it, booted > it, even > > > cleared the profile and started from scratch - but the > problem persists. > > > > > > i got two cards left to play now...: > > > > > > 1) the hope that someone on the list knows what i'm doing > wrong and > > > tells me > > > 2) that plugging in the ISDN connection will somehow "fix" > my pipeline. > > > i don't have the phone connection yet to try it. > > > > > > > > > thanks for any hint > > > > > > daniel > > > > > > > > > > ---------------------------------------------------------------------- > --- > > > - Daniel Wesemann wesi@siemens.ch > <A HREF="http://www.siemens.ch">http://www.siemens.ch</A> > > > - > > > - UNIX and Network Administration Siemens Switzerland > Inc, Zurich > > > - > > > > ---------------------------------------------------------------------- > --- > > > ++ Ascend Users Mailing List ++ > > > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > > > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > > > > > > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg09499.html">Re: (ASCEND) Re: NetBios Filters</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg09514.html">Re: (ASCEND) sigh</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg09495.html">RE: (ASCEND) P50</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg20729.html">(ASCEND) P50</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail449.html#09498"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd199.html#09498"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>