Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Can a p130 handle a full t1?
> The three PVCs you describe above will work fine. You five the
>P130 the DLCIs. The Pipeline knows nothing about bandwidth, however, so
>you have to rely on the Frame switch to limit bandwidth, which works fine
>until you have, for instance, a 384k connection into the Frame Switch to
>support these three PVCs and the jerk with 64k runs a warez server. Then
>people requesting data over it will flood your T1 as the bandwidth
>limiting is going to take place at the Frame Switch, not the Pipeline.
>Thus I wouldn't want to do this for someone who is going to be serving
>lots of data... if they are going to be responsible and/or just pull in
>data that's cool. On the Cisco you can naturally do a sub interface and a
>bandwidth command, but no per PVC bandwidth restrictions.
Just a note...this is not true.
On Cisco equipment using 11.2 Frame Relay Traffic Shaping, you can enforce per-PVC bandwidth restrictions at the router/access server.
Wade
---------------------------------------------------------------------------
Wade Williams "Any escape might help to smooth the
Systems Engineer unattractive truth, but the suburbs
Cisco Systems, Inc. have no charms to soothe the restless
Brentwood, TN dreams of youth."
615-221-2918 - N. Peart
wwilliam@cisco.com
---------------------------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: