Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Three Retrains



Hi,

We definately get it with USR's but with less regularity than I would
expect.  It seems to be coming from "across the board", however, I can't
be certain, since (unless I'm missing something) the debug dispay doesn't
reference anything that I could use to track down the individual user, to
see what they're using.  Could we include a reference to the session ID on
the next implementation maybe?

Alex P

On Wed, 24 Sep 1997, Kevin Smith wrote:

> At 02:48 PM 9/24/97 -0400, Alex P wrote:
> >Hi, I can confirm that it's happening with frightening regularity, as can
> >my tech support people.  
> 
> Is it being reported across the board, or more prevalent with the USR modems?
> 
> Are these particular clients 'forcing' the rate to 28,800 ?
> 
> >Kevin, do you know if this has been reported to Rockwell yet, or if we can
> >expect any resolution before the next code release from them?
> 
> Rockwell are aware of this report, but I don't think they've heard it from
> elsewhere....I'm checking with our contacts.
> 
> >Thanks,
> >
> >Alex P
> >
> >On Wed, 24 Sep 1997, Talbert K. Coker wrote:
> >
> >>  I think that this has been touched on but I am seeing
> >> a lot of this and users are starting to complain about
> >> being dropped.
> >> 
> >> TERMINATION REASON.......... 3 RETRAINS
> >> LAST TX rate................ 28800 BPS
> >> HIGHEST TX rate............. 28800 BPS
> >> LAST RX rate................ 28800 BPS
> >> HIGHEST RX rate............. 28800 BPS
> >> PROTOCOL.................... LAPM
> >> COMPRESSION................. V42Bis
> >> Line QUALITY................ 127
> >> Rx LEVEL.................... 049
> >> Highest Rx State............ 67
> >> Highest TX State............ 67
> >> EQM Sum..................... 0034
> >> RBS Pattern................. FF
> >> Rate Drop................... FF
> >> Local Rtrn Count............ 02
> >> Remote Rtrn Count........... 00
> >> V8bis  not successful
> >> 
> >> Why should 3 retrains be the limit if I am reading this
> >> right
> >> and is there anything I can do about it?
> >> 
> >> Running max 4048 w/PRI - ap23
> >> 
> >> Talbert K. Coker
> >> http://www.flosc.net
> >> 
> >> 
> >> 
> >> ++ Ascend Users Mailing List ++
> >> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> >> 
> >
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> >
> 
> Kevin
> 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


References: