performing NAT on an inbound call, or during a callback from the remote
(where the remote side places call to the pipeline doing NAT)
will only work when there is some authentication method (PAP/CHAP)
sent from the remote to the pipeline. I could not find any documentation
that specified one way or the other if this is the expected behavior.
I would get:
>PPPIF: open: routeid 8, incoming YES
>PPPIF-2: vj comp on
>PPPIF-2: _initAuthentication
>PPPIF-2: auth mode 0 [RECV Auth=None]
>PPPIF-2: no auth
>PPPIF-2: Link Is up.
>PPPIF-2: pppMpNegUntimeout last 0 layer 0
>PPPIF-2: pppMpNegUntimeout last 0 layer 0
>PPPIF-2: LCP Opened, local 'Answer', remote ''
>PPPIF-2: _openAuthentication
>PPPIF-2: Auth Opened
>PPPIF-2: Forcing STATE_OPENED
>PPPIF-2: Remote hostName is ''
>PPPIF-2: prep MP bundle for
>PPPIF-2: No profile with name ''
>_authOpened:ss->mpID == 0:Answer
>PPPIF-2: new MP bundle
>PPPIF-2: First channel, MpID 37
>PPPIF: Assigning vjInfo (2BFC50) and bncpInfo(2B6C86)
>PPPIF-2: opening CCP
>PPPIF-2: pppMpSendNeg Pkt
>PPPIF-2: pppMpNegTimeout layer 6
>PPPIF-2: opening IPNCP: 198.178.171.129 -> 0.0.0.0
[198.178.171.129 is p50 running NAT]
>PPPIF-2: pppMpSendNeg Pkt
>PPPIF-2: pppMpNegTimeout layer 4
>PPPIF-2: pppMpSendNeg Pkt
>PPPIF-2: pppMpSendNeg Pkt
>PPPIF-2: pppMpNegUntimeout last 0 layer 6
>PPPIF-2: pppMpNegUntimeout last 0 layer 6
>PPPIF-2: CCP Opened
>PPPIF-2: pppMpNegUntimeout last 0 layer 4
>PPPIF-2: pppMpSendNeg Pkt
>PPPIF-2: pppMpNegUntimeout last 0 layer 4
>PPPIF-2: IPNCP Opened to 205.142.28.6
[205.142.28.6 is remote MAX unit]
>NAT: setXlat ifNum 2; dynamicIp 0; localIp 0.0.0.0
-jim h
---
Jim Howard bit@bintec.com
Binary Technologies <A HREF="http://bintec.com/">http://bintec.com/</A>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg04056.html">Re: (ASCEND) Burp Tone in Ap23?</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg04052.html">RE: (ASCEND) Be careful with 5.0Ap23!</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg04148.html">Re: (ASCEND) What's the bug in 5.0Ap20?</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg04058.html">(ASCEND) 5.1 NAT Problems?</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail4.html#04054"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd158.html#04054"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>