Well in this mail I have 3 question and maybe you can help me to solve them.
In this moment my TNT is running software 1.3Ap5 and have connected 4E1 ISDN/PRI
and 1E1 R2.
1- My first problem is with the R2 signaling. When i try to use R2
signaling the TNT receive the call but it can't route it to the modems then
TNT give me this message
M: 354 L: info Src: shelf-1/controller
[1/1/1/9] [MBID 90; -> 544361] Call rejected,
no ports available, [56k-restricted] -> 544361
I have the r2-signaling-mode enabled in the TNT, I'm running software
version 1.3Ap5 and my E1 is configured in this way:
enabled = yes
t-online-type = none
t302-timer = 1500
frame-type = 2ds
clock-source = eligible
clock-priority = middle-priority
signaling-mode = e1-r2-signaling
default-call-type = voice
switch-type = switch-cas
front-end-type = short-haul
channel-config = [ { unused-channel 9 "" { any-shelf any-slot 0 } 0 } { switche+
layer3-end = x-side
layer2-end = b-side
nl-value = 64
loop-avoidance = 7
number-complete = 7-digits
group-b-signal = signal-b-6
group-ii-signal = signal-ii-2
answer-delay = 200
caller-id = no-caller-id
admin>
channel-config[1] = { unused-channel 9 "" { any-shelf any-slot 0 } 0 }
channel-config[2] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[3] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[4] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[5] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[6] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[7] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[8] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[9] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[10] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[11] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[12] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[13] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[14] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[15] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[16] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[17] = { unused-channel 9 "" { any-shelf any-slot 0 } 0 }
channel-config[18] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[19] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[20] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[21] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[22] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[23] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[24] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[25] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[26] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[27] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[28] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[29] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[30] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[31] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
channel-config[32] = { switched-channel 9 544361 { any-shelf any-slot 0 } 0 }
admin>
admin>
Do you have any idea why the TNT can not route the calls to the digital modems ?
2- My second problem is with the ISDN/PRI and the slip protocol. I have
this situation when I'm connecting in the TNT in the terminal server mode
and try to open a slip session the TNT hang up the call.
this is my slip setting:
admin> list slip
slip = yes
slip-bootp = no
info = advanced-slip
Do you have any idea about what happend here ?
3- And finally I'm having these logs
LOG error, Shelf 1, Controller, Time: 20:17:44--
Slot 1/5, timeout failure code=0 during SEND_WATCHDOG
LOG error, Shelf 1, Controller, Time: 20:17:44--
Slot 1/7, timeout failure code=0 during SEND_WATCHDOG
LOG error, Shelf 1, Controller, Time: 20:17:44--
Slot 1/9, timeout failure code=0 during SEND_WATCHDOG
LOG error, Shelf 1, Controller, Time: 20:17:44--
Slot 1/11, timeout failure code=0 during SEND_WATCHDOG
Do you know what can produce these kind of errors ?
Thank you for your anwsers and sorry for this large mail.
Enrique
--
Atentamente.
*******************************************************************************
Enrique Josue Torres Angeles eta@rcp.net.pe
Dept. de Proyectos Lima - Peru
Dept. de Operaciones
Red Cientifica Peruana Telefono : 51-1-9544799
Av. Larco 770 - Miraflores 51-1-2415689
3er Piso Fax : 51-1-2411320
*******************************************************************************
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg08395.html">Re: (ASCEND) Problems with MAX TNT running software 1.3Ap5</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Matt Holdrege <matt@ascend.com></LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg08385.html">Re: (ASCEND) Problems loading b.p75</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg08384.html">(ASCEND) MAX 4000 killed by 5.0Ap16</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg08389.html">Re: (ASCEND) MAX 4000 killed by 5.0Ap16</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg08395.html">Re: (ASCEND) Problems with MAX TNT running software 1.3Ap5</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail21.html#08387"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd152.html#08387"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>