Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) MAX200+, MS-CBCP und RADIUS
Hello,
I have problems with a MAX 200+ in cinjunction with RADIUS and MS-CBCP.
Perhaps someone can help me...
Environment: MAX 200+ with 1 ISDN-BRI and 1 ananlog-PCMCIA-Modem.
Release 6.0.10 (aalso 6.1.3 and 5.0Ap33 tried)
Goal: MAX shell do Microsoft-Callback (CBCP), no matter if user calls in
via analog or ISDN, and authentication must be throug RADIUS
Problem: CBCP works _always_, if user is locally defined in the MAX
CBCP works _only_for_ISDN_ if USer is authenticated via RADIUS
If user is authenticated in RADIUS and calls in with modem, the MAX tries
to make the Call-back, but unfortunately not via its modem but via its
ISDN-interface!
I Append the RADIUS users file:
#test1 Password = "test1", Ascend-Token-Immediate = Tok-Imm-Yes
# User-Service = Framed-User,
# Framed-Protocol = PPP,
# Framed-Address = 101.0.0.184,
# Framed-Netmask = 255.255.255.255,
# Framed-Compression = Van-Jacobsen-TCP-IP,
# Framed-Routing = None,
# Ascend-Idle-Limit = 300,
# Ascend-Maximum-Channels = 1,
# Ascend-Client-Assign-DNS = DNS-Assign-Yes,
# Ascend-Route-IP = Route-IP-Yes,
# Ascend-Data-Svc = Switched-modem,
# Ascend-CBCP-Enable = CBCP-Enabled,
# Ascend-CBCP-Mode = CBCP-Profile-Callback,
# Ascend-CBCP-Delay = 15,
# Ascend-Send-Auth = Send-Auth-None,
# Ascend-Dialout-Allowed = Dialout-Allowed,
# Ascend-Dial-Number = "xxxmy-callback-numberxxx"
Logfile of a successfull ISDN-login-with-callback:
Aug 13 15:43:47 max ASCEND: slot 0 port 0, line 2, channel 1, Incoming
Call, 07131xxxx [MBID 11; 07131xxxx->2]
Aug 13 15:43:47 max ASCEND: slot 9 port 1, Assigned to port, 07131xxxxx
[MBID 11; 07131xxxxx->2]
Aug 13 15:43:48 max ASCEND: slot 9 port 1, line 2, channel 1, Call
Connected, 07131xxxx [MBID 11; 07131xxxx->2]
Aug 13 15:43:48 max ASCEND: call 11 AN slot 9 port 1 64K 2
Aug 13 15:43:49 max ASCEND: call 11 CL 0K u=test1 c=102 p=84 s=64000
r=64000
Aug 13 15:43:49 max ASCEND: slot 9 port 1, line 2, channel 1, Call
Disconnected [MBID 11; 07131xxxx->2]
Aug 13 15:43:49 max ASCEND: slot 9 port 1, Call Terminated [MBID 11;
07131xxxx->2]
Aug 13 15:44:01 max ASCEND: slot 9 port 1, Outgoing Call, 007131xxxxxxxx
[MBID 12]
Aug 13 15:44:03 max ASCEND: slot 9 port 1, line 2, channel 1, Call
Connected, MBID 012 [MBID 12]
Aug 13 15:44:03 max ASCEND: call 12 OR slot 9 port 1 56K 007131xxxxxxx
Aug 13 15:44:04 max ASCEND: slot 9 port 1, LAN session up, test1 [MBID 12]
-> LAN session is up & running
Logfile of a not-successfull modem-callin-and-back:
Aug 13 16:16:57 max ASCEND: slot 0 port 0, line 1, channel 1, Incoming
Call, MBID 002 [MBID 2]
Aug 13 16:16:57 max ASCEND: slot 9 port 1, Assigned to port, MBID 002
[MBID 2]
Aug 13 16:16:57 max ASCEND: slot 9 port 1, line 1, channel 1, Call
Connected, MBID 002 [MBID 2]
Aug 13 16:16:57 max ASCEND: call 2 AN slot 9 port 1 MODEM
Aug 13 16:17:01 max ASCEND: call 2 CL 0K u=test1 c=102 p=84 s=28800
r=28800
Aug 13 16:17:01 max ASCEND: slot 9 port 1, line 1, channel 1, Call
Disconnected [MBID 2]
Aug 13 16:17:01 max ASCEND: slot 9 port 1, Call Terminated [MBID 2]
Aug 13 16:17:16 max ASCEND: slot 9 port 1, Outgoing Call, Telxxxx [MBID 3]
Aug 13 16:17:17 max ASCEND: call 3 CL 0K c=185 p=2
Aug 13 16:17:17 max ASCEND: slot 0 port 0, line 2, channel 1, No
Connection, Cause code 001
Aug 13 16:17:17 max ASCEND: slot 9 port 1, Call Terminated [MBID 3]
I found out that the outgoing call is done via the ISDN-card instead of
the modem-card.
Obviously tha MAX ignores the RADIUS-attribute Ascend-Data-Svc=Switched-modem
completely. I also ejected the ISDN-card and tried again (I wanted to
force the MAX to dial out via the analog modem card), but all what happens
is the MAx says: "no channel available", so it always seems to try to dial
out via ISDN-interface, ignoring the Ascend-Data-Svc settings.
If the user is defined locally in the MAX connection profiles, ISDN AND
analog-dail-in &callback are working...
Anyone any idea? Has anyone this configuration up&running?
Greetings
E. Haag
----------------------------------------------------------------------
Elmar Haag CENTAUR COMMUNICATION Urbanstrasse 68
haag@centaur.de Xlink PoP Heilbronn 74074 Heilbronn
http://www.centaur.de Tel +49 7131 799 0 Fax +49 7131 799 260
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>