Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max 4000 - Drop and Insert with PBX
Kevin -
Can the MAX do ISDN-to-ISDN D&I? and ISDN-to-Robbed Bit D&I for both
incoming and outgoing calls?
scott
On Tue, 16 Jun 1998, Kevin A. Smith wrote:
> At 11:52 AM 6/16/98 +0200, Magnus Nylander wrote:
> >At 02:25 AM 6/16/98 -0700, you wrote:
> >>At 08:13 PM 6/15/98 +0200, Magnus Nylander wrote:
> >>>I have got a customer who is having problems setting up a Max 4000 with his
> >>>PBX:
> >>>
> >>>He has PRI/E1 coming in using Net 5/G703 - he wants to have 20 of the
> >>>channels for
> >>>his PBX, so he has configured the Max, Line 1=Trunk, Line 2=D&I. Ch 1-20 on
> >>>Line 1
> >>>for D&I and Channels 21-31 for None.
> >>>
> >>>No calls can get through to the PBX, the callers just get Number
> >>unobtainable.
> >>>
> >>>Has anyone had any experience of this?
> >>
> >>How is the signalling setup on the D&I trunk?
> >
> >Line 1
> >
> >1st Line = Trunk
> >Signalling - ISDN
> >Switch - Net 5
> >Framing - 2DS
> >
> >Line 2
> >
> >2nd Line = D&I
> >Signalling - ISDN
> >Switch - DASS2
> >Framing - G703
>
> My point was that it's not possible to pass on the signalling in a D&I
> configuration when setup for ISDN. We support it here in the US with
> inband signalling trunks (CAS), and with DPNSS (which I believe is a
> symmetrical protocol). No other combinations are supported with D&I.
>
>
> Kevin Smith Ascend Communications...
> Customer Satisfaction ...where Network Solutions never end.
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: