Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) How can I log information on dialin users modem vs ISDN 128k
At 04:06 PM 7/14/98 -0400, KCnet wrote:
>Hello to the ascend users group. I'm the network administrator for an
>ISP which currently has 3 max boxes 4002,4048,4004. my problem is (i
>think) the t1pri's we use are available for both modem and isdn. I need
>to log if an isdn user uses 2 channels for a 128k connection so that we
>can bill at a higher rate. I have the max boxes and radius setup to
>accept mpp, mp, and ppp but, what can i use to make sure someone who has
>a std modem account and then buys isdn phone and equipment service won't
>get away with using 2 channels and get billed for 1 channel?
>
>I'm very new to the ISP system administration duties and would like any
>help you can provide. I looked at some of the existing group mail but
>didn't see anything to help me so if this question has been asked
>before, i apologize for asking again.
>
Hi Bob,
There's 2 ways of doing this that I know of. The first involves looking at
your RADIUS accounting logs for users getting 2 channels. I'm not familiar
w/ that at all, so let's skip to what i do know.
Setup your default radius profile to only allow 1 channel. Then give
certain users access with 2 channels when they request it. That way you
know who's getting what because that's how you configured it.
The Radius attribute we use is Port-Limit = `1 or 2`. i believe Ascend
radius also has their own attribute, something like
Ascend-Maximum-Channels = `1 or 2`.
HTH
---
kevin
ISDN Support Staff kevin.b@flash.net
Flashnet Communications [Quake is law]
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: