Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) IDSL

           I'm checking with my CLEC/DSL service provider.  I believe
           the Pipeline will send its ISDN
           over DSL to the CLEC where the data will travel over their
           ATM network and eventually be trunked
           back to our premesis via frame relay on a T1 which will
           terminate on one of our Cisco 7507s.

           Thanks for the responses.

           Michael





           From: Jim Howard <jhoward@lyceum.com> AT Internet on
                 05/01/98 04:19 PM EDT

           To:   Michael Medwid/Cupertino/Cal/SYMANTEC
           cc:   ascend-users@bungi.com AT Internet@ccMTA-USCU-NT-MTA
           Subject:  Re: (ASCEND) IDSL



           At 11:17 1998/05/01 -0700, Michael Medwid wrote:
           >was..I'm trying to find out if IDSL is available on all
           models of the
           >Pipeline 75.  We have many Pipelines with the
           >older serial numbers 6xxxxxx and a number of them above
           the 72xxxx.  Is it
           >simply a code revision dependent feature that
           >gives you IDSL?  Or must you have one of the newer P75s
           (post 72xxxx)?

           If you have an Ascend Max at the remote end providing the
           IDSL,
           you can use any device on your end, including any model
           p50/p75,
           any sort of ISDN TA. the Max just emulates an AT&T switch
           type.

           -Jim H
           ----
           Jim Howard             Sr Network Engineer        Lyceum
           Internet
           jhoward@lyceum.com     http://www.lyceum.com/
           404.248.1733

           My PGP Public Key:
           http://www.lyceum.com/~jhoward/pgp-key.txt Fingerprint:
           7E8B E2BA 1314 2535 CB08  CFF9 119B 7CD3 2488 954D