Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Nat won't, nailed ain't!
Adam Chappell wrote:
>
> Sorry, 'shot. As far as I can see, your setup *should* work. Here's
> one of my P130s with a special map for telnet to configure the
> router. I'm using 192.168/16 just like you. Also like you, I've
> redirected telnet, smtp and web.
>
> 20-B01 NAT...
> x Static Map 01
> x >Valid=Yes
> x Dst Port #=23
> x Protocol=TCP
> x Loc Port #=23
> x Loc Adrs=192.168.1.9
>
> FWIW I have Def Server=0.0.0.0 and both of the reuse address params
> disabled. The above setup is running a special engineering release of
> the software now because of we grief we had with the combination of
> the firewall and NAT, but I'm confident that it also works with 5.1Ap9
> and 5.1Ap4.
>
> Try modifying the local port number: make it something like 2023
> mapping to a destination of 23 and see if that makes any difference,
> eg you telnet to port 2023 and get mapped to the real telnet port.
My setup is the same, except for 192.168.101.1 is the Pipeline. Def
Server is 0.0.0.0 and reuse disabled. I'm running 5.1Ap6
Could something on the MAX end be blocking it?
I'm at a loss. Thanks again-
'Shot
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: