Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MPP on a Max4048 with tik.m40 5.0Ap42
Sorry, I was attempting to reply to someone in our tech support staff and
butterfingered the response. My apologies.
Joe Shaw - jshaw@insync.net
NetAdmin - Insync Internet Services
Fortune: Pretend to spank me -- I'm a pseudo-masochist!
On Sat, 30 May 1998, Joe Shaw wrote:
> Ok. 209.16.18.35/28
>
>
> Joe Shaw - jshaw@insync.net
> NetAdmin - Insync Internet Services
> Fortune: Pretend to spank me -- I'm a pseudo-masochist!
>
> On Fri, 29 May 1998, R. Marc wrote:
>
> > > Every time the unit connects the second channel drops immediately with a
> > > disconnect code 11
> >
> > Well, the Framed-Route, Ascend-Base-Channel-Count and Ascend-Minimum-Channels,
> > are not necessary. You already get that route with the address and netmask
> > commands. The base and minimum statements are really only applicable if
> > the max is dialing (which I'm assuming it's not). Other than that I don't
> > see anything wrong with the profile. You will need to be doing PAP on
> > the client side rather than a script; something you're probably already
> > doing.
> >
> > > username Password = "passwd"
> > > User-Service = Framed-User,
> > > Framed-Protocol = MPP,
> > > Framed-Address = 206.26.70.225,
> > > Framed-Netmask = 255.255.255.240,
> > > Framed-Route = "206.26.70.224/28 206.26.70.225 1",
> > > Ascend-Base-Channel-Count = 2,
> > > Ascend-Minimum-Channels = 2,
> > > Ascend-Maximum-Channels = 2,
> > > Ascend-Idle-Limit = 0
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: