Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) VPN with IPSec
Hi,
I want to establisch a IPSec tunnel between two private networks over
the internet, and I do need some answers. Here is my configuration:
/192.222.100.x (Dynamic IP-Addr.)
/
+-----------+/ +------------+
|Pipeline 50|------- Internet -------|Pipeline 220|
+-----------+ /+------------+
192.168.10.1 | 192.50.20.1/ | 192.168.20.1
| |
| |
| | | | | |
---------+---------- -----------+-----------
| | | |
LAN A: 192.168.10.x/24 LAN B: 192.168.20.x/24
IPSec and SCF (Secure Connect Firewall) are enabled on both pipelines.
The pipeline 50 is running 6.0.10 and the 220 is running 6.1.x. The
computers in LAN A and B do not need a direct connection to the
internet, i just want to route packets between these two networks over
the internet as if they were connected by a simple ip router. The
traffic should be encrypted. I studied the SecureConnect Manager
userīs guide, but I still do not know how to configure the
firewalls/routers. Do I have to enable NAT or RTNAT? I do not think
so. How can a configure e.g. the pipeline 50, to route packets from
192.168.10.x to 192.168.20.x over the internet? By means of static
routes? In both networks I use private adresses which are normally not
routed in the internet. How does the IPSec (VPN) tunnel configuration
look like?
Best wishes
Stephane Lux
--
Stephane Lux (chipie@pironet.de)
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>