Re: (ASCEND) Can't get Max1800 to accept modem calls on *some* lines...

["John T. Farmer" <jfarmer@goldsword.com>]

On Sun, 28 Nov 1999 19:08:20 Eric Schnoebelen said:
>"John T. Farmer" writes:
>- - I have a Max1800 setup with several BRIs and the digital modem card in it.
>- - Initially, we were using it only for ISDN dial-ins and later added the
>- - modem card.  Now I'm trying to get to it to accept analog calls as well
>- - as digital (hopefully to the same number).  So far, of the 3 BRIs I've
>- - connected for testing, it will accept modem calls on one of them, but
>- - not the others.  I've been over the configuration, read everything I could
>- - find on the Ascend site, even searched the archives of the list...
>
>        I ran into this a few months ago..
>
>        Make sure that your BRI's are configured _without_ EKTS.
>I found that having EKTS enabled allowed only the lead channel
>of the BRI to accept an analog call, but the secondary channel
>could not.  Once EKTS was removed from the BRI configuration,
>all worked as expected.

Hmmm, interesting.  I haven't heard back from BellSouth yet on the 
line configuration question.  I did go back and check for this.

In my case, it's the opposite, the BRI's that are misbehaving will
accept analog calls to their _second_ number but will accept ISDN data
calls to the either the first or second numbers.  And in theory, the
line that is working is provensioned the same as the others...

John

----------------------------------------------------------------------
John T. Farmer            Owner & CTO               GoldSword Systems
jfarmer@goldsword.com     423-691-6498              Knoxville TN
    Internet Services & Servers, Network Design, Consulting
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>