Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Re: Ascend Max to Pipe NAT question
Actually, that is exactly what I have done. I have setup a local profile in
the Max but still no go.
Below is what I got from pppif:
PPPIF-34: vj comp on
PPPIF-34: _initAuthentication
PPPIF-34: auth mode 1
PPPIF-34: PAP auth, outgoing
PPPIF-34: Link Is up.
PPPIF-34: pppMpNegUntimeout last 0 layer 0
PPPIF-34: pppMpNegUntimeout last 0 layer 0
PPPIF-34: LCP Opened, local 'max002', remote ''
PPPIF-34: _openAuthentication
PPPIF-34: pppMpNegUntimeout last 0 layer 1
PPPIF-34: Auth Opened
PPPIF-34: Remote hostName is ''
PPPIF-34: prep MP bundle for
PPPIF-34: using profile hostname max002
PPPIF-34: authOpenedContinue
PPPIF-34: prep MP bundle for
PPPIF-34: using profile hostname max002
PPPIF-34: new MP bundle
PPPIF-34: First channel, MpID 233
PPPIF: Assigning vjInfo (B05D9300) and bncpInfo(B0596A40)
PPPIF-34: CBCP Opened
PPPIF-34: pppMpSendNeg Pkt
PPPIF-34: pppMpNegTimeout layer 4
PPPIF-34: opening CCP
PPPIF-34: pppMpSendNeg Pkt
PPPIF-34: pppMpNegTimeout layer 6
PPPIF-34: opening IPNCP: xxx.xxx.xxx.xxx -> yyy.yyy.yyy.yyy
PPPIF-34: pppMpSendNeg Pkt
PPPIF-34: pppMpNegTimeout layer 4
PPPIF-34: pppMpNegUntimeout last 0 layer 6
PPPIF-34: pppMpNegUntimeout last 0 layer 4
PPPIF-34: pppMpSendNeg Pkt
PPPIF-34: pppMpSendNeg Pkt
PPPIF-34: pppMpNegUntimeout last 0 layer 4
PPPIF-34: IPNCP Opened to yyy.yyy.yyy.yyy
PPPIF-34: _pppClose called
PPPIF-233: pppMpNegUntimeout last 1 layer 0
PPPIF-34: cleanup pass
Any ideas,
Thanks.
Daniel
At 02:19 PM 6/22/99 PDT, you wrote:
>I'd first try building a local connection profile on the max just
>for testing purposes, then after I get outbound calls from the max
>to the pipe working successfully I'd offload it RADIUS. Sort of a
>divide and conquer method. Also on the max I'd go into diagnostics
>mode (F1 key, d for diagnostics) and type pppif, then you'd know
>at what stage PPP negotiation is failing.
>
>
>
>>From: Daniel <daniel@lynx.net>
>>To: Jason Murphy <jmurphy89@hotmail.com>
>>CC: <ascend-users@bungi.com>
>>Subject: Re: Ascend Max to Pipe NAT question
>>Date: Tue, 22 Jun 1999 09:42:21 -0700
>>
>>Yes, I have set the remote IP address on the P50 as the Max4k's IP address
>>and also the remote name as well. I will try to capture the hex code to see
>>what is going on.
>>
>>Thanks.
>>
>>Any more suggestion as where to look into ?
>>
>>Daniel
>>
>>
>>At 09:07 AM 6/22/99 PDT, you wrote:
>> >Hi, I saw your posting on the Ascend mailing list. I think that for PPP
>> >negotiation to work you need to set the Pipeline's remote IP address
>>under
>> >the config menu to that of the max's. I ran into this before. Make sure
>>that
>> >the remote name on the Pipe is set to the system name of the max also.
>>What
>> >you may want to do though is to go into diagnostics mode (hit the F1 key,
>> >then d for diagnostics) and do a
>> >>wandisplay 64
>> >- then bring up the call from the max end and you will see hexadecimal
>> >output. Capture the trace with your telnet program or terminal emulation.
>> >Then email it to suppport@ascend.com and ask them to decode the trace to
>> >determine exactly where the PPP negotiation is failing.
>> >
>> >
>> >
>> >_______________________________________________________________
>> >Get Free Email and Do More On The Web. Visit http://www.msn.com
>> >
>> >
>>
>
>
>_______________________________________________________________
>Get Free Email and Do More On The Web. Visit http://www.msn.com
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>