RE: (ASCEND) Software Release Request (Ascend Max 4xxx)

[Steve Hovey <shovey@buffnet.net>]

You dont get the solid tones or dead connects? (have you call tested with
a phone?  I get them 1 in 4 to 8 tries, which is why I downgraded) or are
you using pri's?

On Thu, 3 Feb 2000, Daniel J. Vance wrote:

> We are running 4048's and 6096's with 7.0.22.  I I have people complaining
> about disconnects...But I've pointed fingers at outdates drivers or phone
> lines.  I'm curious as to what people are running that is stable.
> 
> Sincerely,
> Daniel J. Vance
> 
> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of PowerNet
> Sent: Thursday, February 03, 2000 5:29 AM
> To: ascend-users@bungi.com
> Subject: Re: (ASCEND) Software Release Request (Ascend Max 4xxx)
> 
> 
> We are running 7.0.22 on a couple boxes.  I have noticed that a lot of users
> are calling with disconnect problems.  We also only use CT1.  We upgraded
> from 7.0.4 which seemed not to work as well with some of the newer modems,
> but now others are having problems...
> Catch 22.
> What code to use?
> 
> *********** REPLY SEPARATOR ***********
> 
> On 2/3/00, at 1:33 AM, ascend@lewiscounty.com wrote:
> 
> >We too had problems with analog callers connecting to 7.0.22. Some worked
> >great others that had worked well were screaming! We are currently running
> >7.0.1 (4048 & 6000 chassis) and I've connected at 1200 - v.90 with no
> >problems. We've been running it for months and works. We've been up 98 days
> >accros all my boxes at present. I had a generator glitch 98 days ago that
> >allowed all my boxes to reboot during an extended outage... other wise
> we've
> >seen up times of 180 plus days between reboots. We're  running CT1 verses
> >PRI which I believe is why I can't run 7.0.22. Any one have any thoughts on
> >this therory?
> >
> >Randy Smith
> >Tiger Mountain Technologies
> >
> >----- Original Message -----
> >From: Pavane, Brian <brian.pavane@ggn.com>
> >To: <ascend-users@bungi.com>
> >Cc: Camas, Steve <Steve.Camas@ggn.com>; Smith, Kevin <Kevin.smith@ggn.com>
> >Sent: Wednesday, February 02, 2000 2:33 PM
> >Subject: (ASCEND) Software Release Request (Ascend Max 4xxx)
> >
> >
> >> All,
> >>
> >> I'm looking for a stable release of software for the Max 4xxx that will
> >> support the entire range of dialup.  That includes analog (9600bps -
> >v.90),
> >> ISDN (56k, 64k, 56k Data Over Voice).  The reason I am asking this is
> that
> >> the release I'm currently running, 7.0.22, seems to be having a major
> >issue
> >> with analog modem calls.  What are people running out there?  Does anyone
> >> know what software any of the "bigboys" run, if they even use the 4xxx's
> >> anymore?  I'd be interested in the tales people tell of the diffrent
> >> software releases, as finding a good software release from Ascend has
> >always
> >> seemed to be a bit of magic and luck.  Anyone know any releases to stay
> >away
> >> from at all cost?  At least if I can narrow down the list, I may have a
> >> chance of picking something that works well.
> >>
> >> Thanks.
> >>
> >> Brian Pavane
> >> NOC Support Staff
> >> Gillette Global Network
> >> (212) 897-8468 (Direct)
> >>
> >>
> >> ++ Ascend Users Mailing List ++
> >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> >> To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >>
> >
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>