Re: (ASCEND) Unresolved bad unit

[Steve Hovey <shovey@buffnet.net>]

I realise on a boot etc it would send the requests - and they are rejected
- Two problems with your suggestion.  The first is, the worst of the two
machines is a 4048 and there is no 8.x.x for them. And it DID work for
over a year, when it suddenly stopped, sending only these config requests
to radius.  The second problem is that Ive tried 8.x.x on the 6096's and
several other problems reared their heads.

On Wed, 3 May 2000, James Courtier-Dutton wrote:

> Hello
> TAOS 8.x.x has a setting in the EXT-AUTH profile to switch off
> config-requests.
> If you just make sure you reject these config requests, they will slow down
> after a bit.
> TAOS has always sent these requests in the past.
> It should have no effect of normal user radius requests.
> Cheers
> James
> 
> 
> 
> ----- Original Message -----
> From: "Steve Hovey" <shovey@buffnet.net>
> To: <ascend-users@bungi.com>
> Sent: Wednesday, May 03, 2000 2:57 AM
> Subject: (ASCEND) Unresolved bad unit
> 
> 
> >
> > I didnt get anywhere with tech on a box that was producing odd logfile
> > entries in radius - and not validating users.
> >
> > I have since found on my own that the odd entries are rem cfg load
> > requests, but I've no idea why it would try to issue one since I have term
> > serv to no/off.
> >
> > Anyone ever hit this?  The log entries look like this (the values in ''s
> > are the params its trying to load info on):
> >
> > Tue May  2 21:31:44 2000: Authentication: 19/175 'frdlink--1' from
> > asc3.buffnet.
> > net port 0 Outbound - FAILED Authentication failure -- total 0, holding 0
> > Tue May  2 21:31:44 2000: Authentication: 20/176 'bridge--1' from
> > asc3.buffnet.n
> > et port 0 Outbound - FAILED Authentication failure -- total 0, holding 0
> > Tue May  2 21:31:44 2000: Authentication: 21/177 'initial-banner-' from
> > asc3.buf
> > fnet.net port 0 Outbound - FAILED Authentication failure -- total 0,
> > holding 0
> > Tue May  2 21:31:44 2000: Received-Authentication: 25/181 'initial-banner'
> > from
> >
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> 
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>