TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCLUG:4926] docked dell latitude with RH 5.2
Thanks for the help. I had to go out of town unexpectedly so I could only
try this out recently. Anyway, I did everything you suggested.
Xconfigurator seemed to work fine. It probed everything and the settings
all matched my hardware documentation. The monitor flashed like it
usually does during probing. I checked the time stamps on the X files
to make sure they had actually been created correctly and skimmed thru
them.
Unfortunately, when I try to startx the monitor still goes into
power save mode. Occasionally I can switch to another terminal (eg
alt-ctrl-F2) but I can't kill the xserver with alt-ctrl-bckspc. Sometimes
it locks the monitor up hard and I have to reboot.
Any suggetion is welcome.
Thanks,
Dan
On Fri, 19 Mar 1999, Chris Kesler wrote:
> Assuming that your docking station's video hardware is supported, I'd
> suggest running Xconfigurator while the laptop is docked. Back up your X
> and XF86Config first:
>
> cp /etc/X11/XF86Config /etc/X11/XF86Config.undocked
> ln /etc/X11/X /etc/X11/X.undocked
>
> Then run Xconfigurator and hopefully it will probe your new display
> hardware correctly and create a new XF86Config. If it doesn't probe it,
> of course you can select it from the list of cards.
>
> If X is working now and it's on the correct display, then you could make
> copies of the current stuff
>
> cp /etc/X11/XF86Config /etc/X11/XF86Config.docked
> ln /etc/X11/X /etc/X11/X.docked
>
> Then you can create two scripts, one to start X when your docked, and one
> when you're not. Name them xdock and xnot, or something. xnot
> could be like this:
>
> #!/bin/bash
> # startx undocked
> cp -f /etc/X11/XF86Config.undocked /etc/X11/XF86Config
> ln -f /etc/X11/X.undocked /etc/X11/X
> startx
>
> I hope that works for you.
>
> Chris
>
>
> On Fri, 19 Mar 1999, Dan Middleton wrote:
>
> > Hi,
> > I'm new to the list. I've got a laptop with 5.2 on it and
> > recently got a docking station. X worked fine on the laptop's lcd, but
> > when I put it in the docking station it won't recognize that its supposed
> > to hit the crt instead. This is only a problem when I try to start X.
> > Otherwise the scsi connetion forwards the console to the crt just fine.
> > Any thoughts?
> >
> > --Dan
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> > For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> > Try our website: http://tclug.real-time.com
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com
>