TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCLUG:1127] diald and RedHat



I have been using diald on a RedHat 5.1 machine for about a month now.
It has been working flawlessly. I had to make a few changes to the
filter list to keep the netbios traffic from causing the link to come
up, but other than that I didn't change anything. I am using it to dial
up my modem to my isp.

To really see what's going on I'd suggest getting diald-top, which you
can get on sunsite. This lets you view the queued-up packets and tells
you info on the link. (also lets you send command to the FIFO.)

Clay Fandre

Bob Tanner wrote:
> 
> I have been playing with diald under RedHat 5.0.
> 
> Anyone wanna throw their support behind diald as a something good?
> 
> I have a linux box on a Ethernet network, my primary connection is via
> ISDN. I want to use diald to configure up a secondary route via the
> modem. I got the routing right, but diald does not seem to call out
> like the documentation says it will.
> 
> I have even yanked the nic card and still no dialout.
> 
> Anyone have diald working successfully?
> 
> --
> Bob Tanner <tanner@real-time.com>       | Phone : (612)943-8700
> http://www.real-time.com                | Fax   : (612)943-8500
> Key fingerprint =  6C E9 51 4F D5 3E 4C 66 62 A9 10 E5 35 85 39 D9
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com

-- 
------------------------------------------------------------
Clay Fandre            Honeywell - CAS-SPO / Coon Rapids, MN
System Administrator   cfandre@cfsmo.honeywell.com
------------------------------------------------------------